Centrifugal disc finisher – Jewelry Polishing Machine
Introduction
The patented adjustable gap system of the VA series enables a precision of 0.05mm. This unique setting of the gap between the disc and the ring of barrel make super fine polishing granulate to be possibly used as media. The VA series model therefore produces the superior polishing surface with lowest processing cost. Besides, the customized process prevents the gap from overheating.
Working principal
The VA series machine work on the centrifugal disc finishing concept, it functioned with highly effective and efficient mass finishing system. During this process, the components are processing in a barrel shaped container where media and components make rotational relative movement. The media inside the container is driven by centrifugal force of disc which generated from the bottom of the container. The disc is separated from the container wall by an adjustable gap where the water is flowing though in the wet processing machine. In dry processing machine for fine polishing, however, the gap is there for disc rotating.
The centrifugal force with different media act on surface of component gives different finishing result, which will offer at least 20 times high productivity compared with vibratory finishing process. During wet surface finishing processing a constant water and compound flow which at meantime take off wear off debris together. This leaves the components a fresh and clean surface.
在线联系供应商
Other supplier products
 |
Automatic Vibratory finishing machine production line | Rotomatic is suited for continuous running deburring, grinding, cleaning, deflashing and other surface treatment applications, all within a relativ... |
 |
Longitudinal vibratory finishing machine – Continuous | Introduction Recently with increasing cost of manual polishing process and high requirement of automation, continuous linear vibratory finishing... |
 |
centrifugal disc polishing machine – Automatic unloading | Feature: Processing unit (work bowl) The processing bowl is casted with DuPont hot moulded PU lining with thickness 20-25mm for long service time ... |
|
|
Centrifugal disc finisher – Jewelry Polishing Machine | Introduction The patented adjustable gap system of the VA series enables a precision of 0.05mm. This unique setting of the gap between the disc and... |
 |
walnut tumbling media – crushed walnut shell tumbling media | Walnut shells are used for stamped, formed, or chemically etched thin sheets of brass or beryllium copper.Small screw machine parts and jewelry are... |
