.

reduce cost Stirrup bender

Stirrup bender is designed to complete straightening,bending and cutting on one machine. Coil is the prefer raw material choice .The machine is capable of providing our clients the most accurate cutting , straightening, bending and high effect, which is widespread used in high speed railway, bridge, real estate, reinforcing steel processing factories , etc.

Model

KZ16BX

Raw material

coil

Production capacity

Single wire

φ6 -16 (mm)

Double wire

φ6-12 (mm)

  1. saving time Stirrup bender

±180° (double direction)

1200 (°sec)

100 (m/min)

Mandrel diameter

φ25 -φ40(mm)

2500 (mm)

150 (mm)

Length tolerance

± 1 (mm)

Bending tolerance

±1°

Average air-compressed consumption

12 (l/min), ≥0.9Mpa

Average eleetric power consumption

17 (kw)

Labeled electric power

68 (kw)

Voltage

380 (V) – 50 (Hz)

Overall machine weight

7,000 (Kg)

Overall dimension

12,000 * 2650 * 3000 (mm)

Product Advantages

Steel Bending Machine Principle

The wire rod steel bar is firstly conveyed to the bending mechanism of the after horizontal straightening and vertical straightening, and then conveyed to the bending mechanism of the steel bar bending machine, and the flexible bending of the wishing elbow is controlled by the PLC program to quickly realize the bending forming process of the various shapes of the stirrups. Then, the finished product of the stirrup is cut by the steel cutting mechanism. The entire process is fully automated and requires no human intervention.



在线联系供应商

至: SKZ Intelligent Equipment Co. , Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Stirrup Bender Factory
Stirrup Bender Factory Stirrup bender is designed for complete straightening,bending and cutting on one machine. Coil is the prefer raw material choice, but SKZ is the...
Integrated Rebar Cutting
Integrated Rebar Cutting Model KZW50X Conveying speed 40 (m/nin) Bending speed 6 […] Model KZW50X Conveying speed 40 (m/nin) Bending speed 6-8r/...
precision machining Stirrup bender
precision machining Stirrup bender HIGH SPEED STRAIGHTENING & CUTTING MACHINE use the high speed rotating spinner to make straightening. This machine make straight bar from co...
Stirrup Bender Supplier
Stirrup Bender Supplier Stirrup bender is designed to complete straightening,bending and cutting on one machine. Coil is the prefer raw material choice .The machine ...
LOW SPEED STRAIGHTENING & CUTTING MACHINE (KZ6-12X)
LOW SPEED STRAIGHTENING & CUTTING MACHINE (KZ6-12X) LOW SPEED STRAIGHTENING & CUTTING MACHINE (KZ6-12X),Double Wire Straightening Cutting Machine Factory,Low Speed Straightening Cutting Machine ...
供应产品

Same products

Semi-Solid Die Casting
Semi-Solid Die Casting 卖方: Shanxi Rayforce Manufacture Co., Ltd. Based on the theory of stir cast invented by Mr. D.B. Spencer and M.C.Flemings, the semisolid die...
Sand Casting
Sand Casting 卖方: Shanxi Rayforce Manufacture Co., Ltd. Sand casting is the most commonly applied method for casting the metal part. It suits most of the...
Resin Sand Casting
Resin Sand Casting 卖方: Shanxi Rayforce Manufacture Co., Ltd. Resin sand castingis a kind of floor molding process, by mixing the resin with quartz sand and so...
Low Pressure Die Casting
Low Pressure Die Casting 卖方: Shanxi Rayforce Manufacture Co., Ltd. The low pressure die casting is to let the melted metal flow into the casting mold under a certai...
Lost Wax Investment Casting
Lost Wax Investment Casting 卖方: Shanxi Rayforce Manufacture Co., Ltd. The lost-wax casting process can differ depending on the application and the requirement, but it ...