Profile Bending Machine

The profile bendingmachine is special high-efficiency processing equipment for the bending of various profiles such as angle steel, channel steel, I-shaped copper, flat surface, square tube, round tube, etc. The CNC profile bending machinecan complete the end pre-bending and coiling of various profiles He-shaped and hu-shaped workpieces are widely used in aerospace, petrochemical, hydropower, shipbuilding, automobile manufacturing, machinery manufacturing, steel structure construction and other industries. Overview of the structure of the profile bending machine for sale. This CNC profile bending machine is an arc downward adjustment structure, the upper roller shaft is fixed, and the two lower spokes respectively make 35 lines of lifting movement around a central shaft relative to the upper spoke shaft. Its function is mainly to pre-bend the end of the profile and the bending profileis bent and deformed, and at the same time, the two lower spokes are also the main driving shafts, which are driven by a hydraulic motor, so that the bent and deformed profile is rolled into shape. In order to prevent the deformation of the profile during the bending process and improve the bending accuracy of the profile, two rollers and rollers are added, which can move up and down vertically to adapt to the profile of different specifications and different bending radii.

The 180-profile bending machine is a downward-adjustable three-spoke bending machine. The bed is a steel plate structure and is treated to eliminate internal stress. The transmission of the main report is transmitted to the power through the hydraulic system through the hydraulic motor, gears, and sprocket for rotating motion. . The two side rollers move in an arc around the central axis. The power transmitted by the hydraulic motor and gears through the hydraulic profile bending machinesystem and the main stop rotate at the same time. The support rollers are installed on the side caps so that the support report and the side spokes do at the same time. Arc movement to ensure the precision of the rolled profile. According to the requirements of the site and profile, it can be installed vertically or horizontally.

The CNC profile bending roller machineproduced by ezhong, a profile bending machine factory, is a kind of special high-efficiency metal fabrication equipment for bending angle steel, channel steel, I-shaped steel, flat steel, square steel, round copper and other special-shaped steel. Round process. This bending machine is advanced in structure, reliable in work, small in size and complete in functions. It is currently the most advanced profile forming equipment domestic and overseas. EZHONG is a professional profile bending machine manufacturer, and we have high quality profile bending machines for sale, welcome to contact us for profile bending machine price.

CNC Profile Bending Machine Specification

Bending Angle of copper	80X10 Φ800	100X12 Φ1000	120X12 Φ1250	150X16 Φ1000	160X20 Φ1600	200X20 Φ3000	200X28 Φ2000	200X281 Φ1800	200X281 Φ1800
The inside of Angle steel	80X10 Φ1000	100X10 Φ1000	100X12 Φ1250	130X15 Φ1200	150X20 Φ1600	180X16 Φ3000	200X20 Φ2000	200X281 Φ2000	200X281 Φ2000
T beam	80X9 Φ700	100X12 Φ800	120X13 Φ1250	150X15 Φ1200	160X20 Φ1400	200X20 Φ1600	200X28 Φ1800	200X281 Φ1600	200X281 Φ1600
T-shaped steel bend	80X9 Φ1300	100X12 Φ1500	100X12 Φ1500	130X15 Φ1700	150X20 Φ2000	180X18 Φ2500	200X20 Φ2800	200X281 Φ2500	200X281 Φ2500
Flat steel bending	80X18 Φ800	100X25 Φ700	120X25 Φ1000	150X30 Φ1000	175X40 Φ1200	200X50 Φ2000	250X50 Φ1800	250X70 Φ1800	300X70 Φ2800
Flat steel bending	180X20 Φ500	200X35 Φ600	250 X30 Φ1000	250X40 Φ1000	350X50 Φ900	400X60 Φ2000	450 X70 Φ1000	500X80 Φ1200	500X100 Φ1600
Square steel	50X50 Φ500	60X60 Φ600	70X70 Φ800	90X90 Φ1200	110X110 Φ1500	130X130 Φ1800	145X145 Φ2000	165X165 Φ2200	200X200 Φ2500
Round steel	Φ60 Φ600	Φ70 Φ700	Φ80 Φ800	Φ100 Φ1000	Φ125 Φ1200	Φ150 Φ1500	Φ170 Φ1700	Φ190 Φ1900	Φ220 Φ2200
Round tube	Φ76 Φ700	Φ100 Φ1100	Φ142 Φ1800	Φ170 Φ2000	Φ190 Φ2500	Φ220 Φ3000	Φ300 Φ4000	Φ330 Φ5000	Φ400 Φ6500
Square tube	65 X 62)	90X 52)		120 X 82)	150 X 82)	180X102)	200X132)	250X132)	300X132)
I-shaped copper	—	100 Φ800	120 Φ900	160 Φ1100	200 Φ1500	240 Φ2000	280 Φ2000	320 Φ2200	500 Φ3000
Channel Steel Outward Bending	140X603) 0600	160X653) *800	200 X 753) *900	300X1003) 01100	3603 ) 01200	4503) *2000	5003) *2000	5503) *2200	6003) 01500
Channel steel bend	140X603) Φ800	160X653) Φ1000	200 X 753) Φ1000	300X1003) Φ1100	3603) Φ1400	4503) Φ3000	5003) Φ2000	5503) Φ2200	6003) Φ1500
H-shaped steel	—	—	—	120 Φ3500	180 Φ4500	200 Φ9000	220 Φ9600	240 Φ11000	320 Φ32000
	—	—	—	120 Φ2800	160 Φ3200	180 Φ4600	200 Φ5200	220 Φ5600	300 Φ9600
Interface module	18-25	30-40	45-50	95-110	180-320	300-600	400-700	600-1000	900-1500
Motor power		11	11	15	30	37	64	67	67

Ezhong GroupCNC Profile Bending Machine Details

- It is an arc downward adjustment type three-spoke profile bending machine, which can complete the functions of rounding, arcing, and rounding of various profiles at one time. (Note: When the precision of the rolled profile is high, a special mold must be prepared. If the accuracy is appropriately relaxed, a general mold can be used to complete the rolling.)

- The body of CNC profile bending machine adopts steel welded parts, all of which have undergone annealing and other heat treatment processes. It is a closed frame structure. The position of the upper roller is fixed. The two lower rollers can move in an arc around the fixed center of rotation. All three rollers are active rollers. Its power is provided by a hydraulic motor, which can be rotated in both forward and reverse directions; the lifting of the two lower rollers is hydraulically driven, which is stable in transmission, safe and reliable; the supporting roller devices on both sides of the upper roller are beneficial to control the rolling accuracy of the profile. The two lower rollers are equipped with display devices.

- Three-roller full drive system, the upper and lower working rolls of the hydraulic profile bending machine are all active caps. In this way, the "cancellation" phenomenon that may occur during the rolling process can be avoided. The linear speed of the upper and lower working spokes is automatically matched by the hydraulic system during the rolling process. The rotary motion of the profile bending machine is equipped with a braking device to ensure accurate positioning during the work rolling. The device runs smoothly, and the rolling is flexible and reliable.

- The main function of the hydraulic system is to drive the rotation movement of the upper and lower rollers, the lifting movement on both sides, and the tracking of the supporting rollers. The entire hydraulic system has a reasonable design, reliable work, and is equipped with high-precision oil suction and return filters to ensure the cleanliness of the system oil. The cylinder valve group and hydraulic pipeline adopt quick-fit joints used in metallurgical mines and have reliable radial seals to ensure that the entire hydraulic system has no leakage. The main valve groups in the hydraulic system are all high-quality products from Northern Taiwan Precision Machinery. The pumps, oil filters, motors, and seals are all made by domestic famous brand manufacturers with stable performance and reliable quality. All hydraulic components are tested and screened before entering the factory of ezhong profile bending machine manufacturer to eliminate hidden troubles in advance.

Options Of Profile Bending Machine for Sale

■Steel structure bed and eliminate stress.

■Special hardened and ground shaft.

■Mobile console.

■Bidirectional hydraulic side guide shaft.

■Two-speed working system.

■Standard 3+3 manual side support.

■Specially designed box conversion type profile bending machine for sale, the upper shaft can move up and down, and the two lower shafts can move left and right.

■Pressure adjustment for thin and high-precision materials.

■Infinitely variable speed adjustment.

■Various types of pipes, profile molds and HEB, IPN and UPN beam accessories are available according to customer needs.

EZHONG Profile Bending Machine Safe Operation Notes

Other supplier products

	Plate Rolling Machine For Tank	The upper rollers of the machine can be moved vertically and horizontally. The vertical lifting is the hydraulic transmission. The hydraulic oil in...
	Sheet Metal Forming Machine For Automotive	In the locomotive machinery, the professional jaw heavy plate rolling machine can be applied to its production. Generally, in high-strength and wea...
	3 Rolls Plate Bending Machine	The CNC 3/three roll bending machine adopts the structure of the lower cylinder. The upper working roller of this 3 roll bendingmachine is the main...
	Profile Bending Machine	EZHONGhas accumulated rich experience in the manufacturing of plate bending rolling machines such as large-scale horizontal 3 roll bending machine,...
	Horizontal Axle Press	EZHONGis located in the ancient city of Wudu - Ezhou City, Hubei Province. It is one of the heavy forging and shaping equipment enterprises designa...

供应产品

Same products

	Profile Bending Machine	卖方: Hubei Heavy Industry Equipment Co., LTD	The profile bending machineis special high-efficiency processing equipment for the bending of var...
	Plate Rolling Machine For Tank	卖方: Hubei Heavy Industry Equipment Co., LTD	The upper rollers of the machine can be moved vertically and horizontally. The vertical lifting i...
	Plate Bending Machine	卖方: Hubei Heavy Industry Equipment Co., LTD	The plate bending machine chinais forging equipment used to bend metal plates. It is dedicated to...
	Plate Leveling Machine For Sale	卖方: Hubei Heavy Industry Equipment Co., LTD	EZHONG specializes in the production of heavy plate leveling machines, composite plate levelers, ...
	Hydraulic Press	卖方: Hubei Heavy Industry Equipment Co., LTD	As a professional hydraulic press machine factoryin China, Ezhong Groupspecializes in producing s...