Car door prototype with vacuum casting
Car door prototype with vacuum casting
CNC Car Door Prototype,Vacuum Casting Service
Before making a CNC silicone hand model, you need to make a prototype. The prototype can use the more common ABS material, CNC machining can be.
PRODUCTDESCRIPTION
Three simple steps to make a vacuum manifold/vacuum injection molding machine:
1, prototype
Before making a CNC silicone hand model, you need to make a prototype. The prototype can use the more common ABS material, CNC machining can be.
2, silicone mold
After the prototype is ready, start making silicone molds.
After eight hours of drying, the silicone mold was cut open and the prototype was taken out. At this point, the silicone mold is ready.
3, injection type
The liquid gum material is injected into the silica gel mold and dried. The transparent silicone mold has a service life of approximately 20 molds.
The first step: using CNC, SLA, or mud sculpture to make a prototype, do the nozzle
Step 2: Enclose the prototype with a board to prepare for the mold
Step 3: Pour the liquid silicone which has been vacuumed by a vacuum machine into the mold to cover the product.
Step 4: Put the mold into the oven for baking, so that the silicone mold can be accelerated and solidified.
Step 5: Take the prototype out of the mold
Step 6: According to the materials required by the product, vacuum the material and copy the finished product.
在线联系供应商
Other supplier products
 |
Plastic ABS prototype with vacuum casting | Plastic ABS prototype with vacuum casting Plastic ABS Prototype,vacuum casting Average shrinkage value: +/- 0.3mm Maximum size:2500*800*800mm Toler... |
 |
Aluminum parts with rapid tooling | Aluminum parts with rapid tooling PRODUCTDESCRIPTION For the problem of the injection mold processing process, there are generally four stages, f... |
 |
PC prototype with paint surface | PC prototype with paint surface PC Rapid Prototyping,CNC Plastic prototyping With the development of industrial society and the continuous improvem... |
 |
Rapid Plastic Prototype Maker | Rapid Plastic Prototype Maker Plastic ABS Prototype,CNC Plastic prototyping The principle of 3D printing is made by using special materials, layer ... |
 |
Motorcycle Parts with Metal Injection Molding | Motorcycle Parts with Metal Injection Molding Motorcycle Parts Mold,Motorcycle Parts Stampings In the automobile production industry, the body, cha... |
Same products
 |
Industrial 3-Piece Stainless Steel Valve Parts | 卖方: Qingtian Baoli Casting Co., Ltd. | Industrial 3-Piece Stainless Steel Valve Partsare manufactured for use in pipelines and process s... |
 |
METAL BRACKETS | 卖方: JCL Precision Part Co.Ltd. | Custom metal brackets are some of the strongest supports. JCL precision-engineers them to your cu... |
 |
陶瓷型芯注射机 | 卖方: 秦皇岛埃孚科技有限公司 | 陶瓷型芯注射机主要用于形状复杂，高品质、高精度铸件的陶瓷型芯的成型。该设备通过吸收国内外先进制造技术和精铸行业的自身特点，研制开发成功。 合模力：35T-100T |
 |
压蜡机 | 卖方: 秦皇岛埃孚科技有限公司 | 注蜡机用于精密铸造生产中蜡模的制作。合模力最大 ：10T-150T |
 |
全自动脱蜡釜 | 卖方: 秦皇岛埃孚科技有限公司 | 脱蜡釜，是精铸生产中的型壳脱蜡专用设备 内腔尺寸: Φ1000×1200mm/ Φ1200×1500mm/ Φ1400×1600mm |
