ELECTRIC VEHICLE PARTS
Electric Vehicle Parts Overview
Battery Electric Vehicles (BEVs) also known as New Energy Vehicles (NEVs) are made up of three main segments: the traction motor, the battery pack, and the electrical control units. EMP Die Casting is a electric car parts manufacturer, and we specializes in not only the production of the larger BEV/NEV parts, but also the smaller sub-assemblies that make up each segment of the vehicle. We product key products and components such as the motor housing, battery case, DC-AC converter enclosure, battery control ECU enclosure, on-board charger, HV/EV ECU enclosure, and others. EMP as one of leading electric car component manufacturersin China, is consistently researching and developing new ways to produce and improve NEV parts to make our technology smarter, more powerful and our product lighter and more efficient.
Electric Cars Spare PartsDetails
Motor Housing: The purpose of building new energy vehicles is to reduce energy and emissions. The motor housing is an important part of a new energy vehicle motor. Therefore, to both reduce weight and increase cooling, we make use of custom aluminum alloys to make a lighter, more energy efficient motor enclosure.
These aluminum alloy enclosures not only reduce the weight of the vehicle, but they also make the vehicle more efficient by reducing the number of cooling componetry needed for the motor to operate at its best level. Our unique alloy motor cases improve the heat dissipation effect of the motor, are watertight for liquid cooling applications, and are strong enough to feature as a structural electric vehicle components.
Battery case: Battery case is one of the most important components in new energy vehicles. The best NEVs make use of aluminum alloy for the battery case structures as key components that offer security for their battery payloads, but also structural rigidity for the vehicles. Our EV battery box has high-temperature resistance, corrosion resistance, high electrical conductivity, and good heat transfer performance. Large scale battery case castings are an exciting area for die cast aluminum casting technology.
DC-AC Converter: DC-AC Converter plays an important role in the power steering system and composite power system. For example, it can provide power to auxiliary equipment and stabilize the voltage. Our range of DC-AC Converter enclosures easily integrate into a highly-flexible architecture to deliver a unique, feature-rich set of functions and are well-matched to satisfy the electrification needs of our automotive manufacturer partners.
EMP Techis a casting parts manufacturerand electric motor parts manufacturer, we provide electric car battery parts, electric car engine parts, custom automotive partsand etc. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
TELECOM PARTS | EMP Techis a global, full-service manufacturer of china aluminum die castingproducts. With more than 20 years' experience in research & develop... |
 |
MARKET PATTERN OF ALUMINUM ALLOY DIE CASTING IN CHINA | The global die casting manufacturing center is transferred to the mainland of China. China's precision die casting enterprises are mainly distribut... |
 |
ALUMINUM ELECTRIC VEHICLE MOTOR CONTROLLER (HOUSING) | The motor controller is the nerve centre connecting the motor and the battery, used to adjust the performance of the vehicles. It not only guarante... |
 |
OIL PUMP HOUSING | Overview of Oil Pump Housing The influence of automobile oil pump is to suck the gasoline out of the tank, through the pipeline and the gasoline fi... |
 |
CUSTOM BRACKET ADC12 ALUMINUM DIE | Commonly used custom mounting bracketsare custom aluminium mounting brackets, automobile generator brackets, engine brackets, and seat brackets. ... |
Same products
 |
METAL BRACKETS | 卖方: JCL Precision Part Co.Ltd. | Custom metal brackets are some of the strongest supports. JCL precision-engineers them to your cu... |
 |
陶瓷型芯注射机 | 卖方: 秦皇岛埃孚科技有限公司 | 陶瓷型芯注射机主要用于形状复杂，高品质、高精度铸件的陶瓷型芯的成型。该设备通过吸收国内外先进制造技术和精铸行业的自身特点，研制开发成功。 合模力：35T-100T |
 |
压蜡机 | 卖方: 秦皇岛埃孚科技有限公司 | 注蜡机用于精密铸造生产中蜡模的制作。合模力最大 ：10T-150T |
 |
全自动脱蜡釜 | 卖方: 秦皇岛埃孚科技有限公司 | 脱蜡釜，是精铸生产中的型壳脱蜡专用设备 内腔尺寸: Φ1000×1200mm/ Φ1200×1500mm/ Φ1400×1600mm |
 |
CNC TURNING | 卖方: Baoji Haiqiao Industrial & Trading Co., Ltd. | As a CNC turning manufacturerin China, HQ has the capacity to dealing with both small lot and mas... |
