40000m3/hr cyclone industrial dust collector
Introduction:
The CLP-B type cyclone dust collector can be used either alone or in combination with multiple cylinders. It is connected by a common gas inlet
and outlet gas cylinder to satisfy any smoke volume treatment. The unit of each dust collector has four parts: body, volute, core tube and sealed
dust collection device with good performance.
The working principle of the CLP-B cyclone dust collector after adding the bypass is that the dust-laden gas enters the tangential direction from
the entrance. When the air flow obtains the rotating motion, the air flow is separated from the upper and the lower to form a double-scroll
cochlear motion. The dust is in the double-scroll There is a strong separation effect at the boundary. The coarser dust particles are separated to
the outer wall with the down spiral vortex flow. Part of the dust is led out from the central hole of the bypass separation chamber, and the
remaining dust is carried by the downdraft. The upper vortex air flow has aggregating effect on fine-grained dust, thereby improving the dust
removal efficiency. This part of the finer dust particles, from the upper spiral vortex to the upper part, forms a strongly rotating upper dust ring
under the top cover, and enters the upper hole of the bypass separation chamber together with the upper spiral worm gas flow, and is introduced
into the cone through the return air inlet. With the internal air flow, the purified gas is discharged from the exhaust pipe, and the separated dust
enters the hopper.
Structure size:
1. The size of the exhaust pipe The depth of the exhaust pipe should be at the interface between the upper and lower air swirlers. Exhaust pipe
insertion depth and dust removal efficiency. The depth of insertion is about 1/3 of the height of the intake day; and it has nothing to do with the
type of dust, the particle size distribution, and the inlet gas velocity. The deeper the insertion depth of the exhaust pipe, the greater the pressure
loss.
2. Bypass Separation Chamber Side Separation Separation The top side seam of the bypass chamber introduces the upper vortex gas flow into
the bypass separation chamber. The cone side seam introduces the dust ring formed by the lower spiral in the upper cone into the bypass
separation chamber. The height of the side seam is generally the distance from the top edge of the inlet to the top cover.
If you need, please feel free to contact Miss. Livia
在线联系供应商
Other supplier products
 |
1.060LAH6SL-000-6-P EPE industrial oil filter | 1.060LAH6SL-000-6-P EPE industrial oil filter Introduction: EPE filter element is widely used in the hydraulic system and lubricant system to filt... |
 |
Factory New Design Pulse Bag Dust Collector With Air Box | Structure and working principle: Air box pulse bag filter dust collector is composed of shell (usually 5mm carbon steel plate welded), bracket and... |
 |
large project long filter bag dust collector | Introduction: Long bag off-line pulse dust remover is mainly composed of upper tank, middle tank, ash hopper, air inlet flow pipe, bracket, filter... |
|
|
High Flow Pleated Cartridge Water Filter HFU640UY020J | Introduction: PALL large flow filter has a big diameter of 6 inches (152 mm), but no central supporting tube. Only one end of the filter is open a... |
|
|
EPE filter elements 1.0040G100-A00-0-P | EPE filter elements1.0040G100-A00-0-P Introduction: EPE filter element is widely used in the hydraulic system and lubricant system to filter the so... |
Same products
 |
YZH固定式碎石机械臂系统 | 卖方: 山东伊润基础工程有限公司 | 对于固定应用，我们提供高级电源模块。该装置配备有电动机、液压泵和内置过滤器的油箱。对于我们的机器，我们提供手动和远程转向系统。标准设备的特点是手动转向，比例阀通常安装在固定式液压机械手的底座上。... |
 |
固定式机械臂 | 卖方: 山东伊润基础工程有限公司 | 为什么从山东元正行机械设备有限公司购买固定式机械臂。？拥有超过20年的专业生产经验。2.快速高效的售后服务。3.丰富的现场工作经验。4.专业且富有创造力的研发团队。5.中国价格低廉。6.中国的快... |
 |
贵州中钻T45 T51 螺纹钻头 | 卖方: 844239 | SINODRILLS Threaded Button Bits With the top quality of alloy steels imported from USA and the b... |
 |
机械臂系统 | 卖方: 山东伊润基础工程有限公司 | YZH根据您的订单提供定制的底座吊杆系统，以满足您的特定需求。我们提供全系列的底座吊杆系统，配有液压锤、控制装置和电源组，以满足您的需求。这些基座吊杆系统用于安装在废物转运站、主颚、碎石冲击和回... |
 |
破碎机系统 | 卖方: 山东伊润基础工程有限公司 | 破碎机系统是一种设计用于操纵大岩石的机器，包括将大岩石变成小岩石。它们通常用于采矿业，以去除太大或太硬而无法通过破碎机减小尺寸的超大岩石。碎石机由四个主要部件组成：液压破碎机（用于破碎岩石）、动... |
