Drying Stages of Fote Sludge Drying Machine

• 

According to the changes of drying speed in rotary drum of sludge drying machine, drying process is classified into three stages, respectively named as heating period, constant-rate drying speed and falling-rate drying speed.Known as theNO.1 brand of coal slime dryer, Fote Machinery has done a lot of efforts to improve the performance of every stage.

To realize the heating period, it is dependent on the work of feed screw blades and lifting boards. For materials just fed into the drum, their temperature is quite low. When slime materials contact with the heating medium, surface temperature will continuously rise. Then, water content in slime materials begin to be evaporated.

Slime materials are easy to adhere on the wall of rotary drum, since they are covered with water film on surface. To avoid this phenomenon, you should make these slime materials collide with each other as much as possible.For the falling-rate drying period, it plays the roles of improving the evaporation speed, increasing the surface temperature and accelerating the heat-transfer rate.

After being evaporated during this period, slime materials will have more voids inside. Water content inside can rapidly move to the surface of slime material. Along with the rising temperature, water remains inside will be evaporated.To ensure the drying quality and improving the drying speed, falling-rate drying period is mainly for excluding the adsorbed moisture in slime materials.

Quality oriented, product will be excellent. With the service tenet of being responsible for every procedure, every product and every customer,Fote Machinerycan offer the greater discounts for you on website!

Fote Heavy Machinery:

Fote Official Website:

在线联系供应商

至: 河南富特重型机械有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

	Powerful Application of Straw Pellet Mill in China	For countries rich in the biomass energy, they can powerfully apply the straw pellet mill in rural areas. The application of straw pellet machine c...
	Selecting Principle for the FTM Stone Crusher	Stone crusher, mainly used for making the sand aggregates, can be used in fields like railway, building, water conservancy and mining, etc. The fol...
	Key Devices Equipped for Coal Briquetting Plant	With the amazing ability to turn coal wastes into briquettes of great value, coal briquette machine is an important part for the briquette plant. A...
	Progresses of FTM Crusher Company on Chassis Plane	With remarkable features of large crushing ratio, small power consumption and even particle size, cone crusher is quite popular for mineral field. ...
	Ways for the Power Saving of Coal Briquette Machine	Along with the rapid economic development, demands for thecoal briquette press machineare becoming more and more great. Coal briquette press machin...

供应产品

Same products

	固定式机械臂系统	卖方: 山东伊润基础工程有限公司	主要功能包括： ·水平范围为10至40英尺的24个破岩臂系统模型的选择 ·选择10个箱式YZH系列液压断路器，冲击能量等级在375至7500 lb.-ft之间。 ...
	YZH固定式破碎机系统	卖方: 山东伊润基础工程有限公司	我们的固定式破碎机系统在矿山和采石场中不可或缺。它们适用于水平轴或冲击破碎机、钢厂和铸造厂。基座破碎机的优点。它们提高了工厂的生产率。它们减少了维护。全面操作员保护。可选遥控器。定制化产品开发。...
	中国制造YZH固定式破碎机械臂系统	卖方: 山东伊润基础工程有限公司	所有的固定式破碎机械臂系统包括定位底座臂架、ORV系列液压冲击断路器、电力装置和操作员控制装置。首次使用启动和调试，包括操作员和维护培训，是该包装的一部分。
	中国制造商YZH-座式液压碎石机工作臂	卖方: 山东伊润基础工程有限公司	尺寸正确的液压碎石机和位置合适的动臂系统是一种公认的、安全可靠的解决方案，可以最大限度地提高任何破碎回路的生产率。 然而，在购买新的岩石破碎机工作臂系统之前，重要的是要考虑四个关键因素，以最大...
	YZH固定式碎石机械臂系统	卖方: 山东伊润基础工程有限公司	对于固定应用，我们提供高级电源模块。该装置配备有电动机、液压泵和内置过滤器的油箱。对于我们的机器，我们提供手动和远程转向系统。标准设备的特点是手动转向，比例阀通常安装在固定式液压机械手的底座上。...