JK650 All In One DTH Drilling Rig
JK650All In One DTH Drilling Rig
automation All In One DTH Drilling Rig
As the outcome of JK Drilling-Atlas Copco alliance applying expertise from both sides, the outstanding All-In-One drilling rig-JK650 can offer you a totally different drilling feeling.
JK650All In One DTH Drilling Rig, which brings you more automation, higher working efficiency, better reliability and simpler operation. JK650 is the integration of drilling rig and air compressor, the design has many advantages like facilitating air compressor transport and management on mining site, retaining more air energy and requiring less manpower. The equipped high-performance hydraulic dust collecting system meets the latest environmental protection regulations and it's a reliable solution to realize the modern green mining.
The high-output Atlas Copco air compressor delivers pressure of 17bar and FAD of 17m³/min. Powerful and reliable, it suits rock formations of various hardness and offers high penetration rate with ease.
|
General |
Weight |
kg |
10000 |
|
Length |
mm |
7863 |
|
|
Width |
mm |
2400 |
|
|
Height |
mm |
3080 |
|
|
Undercarriage |
Track width |
mm |
300 |
|
Ground clearance |
mm |
370 |
|
|
Track oscillation |
° |
±10° |
|
|
Walking speed |
km/h |
2 (low) / 3 (high) |
|
|
Grade ability |
° |
27° |
|
|
Engine |
Model |
||
|
Type |
Water-cooled six-cylinder EFI diesel engine |
||
|
Rated power |
kw/rpm |
194/2100 |
|
|
Fuel tank capacity |
L |
400 |
|
|
Air compressor |
Model |
Atlas Copco |
|
|
Working pressure |
bar |
17 (high) |
|
|
m3/min |
17 |
||
|
Rotary motor |
Rotation rate |
rpm |
0-70 |
|
Nm |
2904 |
||
|
Feeding method |
Motor-driven planetary gearbox + Chain |
||
|
Feeding force |
kN |
12 |
|
|
Lifting force |
kN |
18 |
|
|
Feeding stroke |
mm |
4148 |
|
|
Feed extension |
mm |
1200 |
|
|
Drilling depth & diameter |
Drilling diameter |
mm |
Φ90-Φ150 |
|
Drilling depth |
m |
50 |
|
|
Pipe length |
m |
3 |
|
|
Pipe diameter |
mm |
76 |
|
|
Dust collector |
Collecting method |
Dry tpye hydraulic dust collecting (Optional wet type) |
|
在线联系供应商
Other supplier products
 |
top hammer drilling rig | JK410Crawler Mounted Pneumatic Tophammer Drill Rig Tophammer Drill Rig , Borehole Diameter 64-89mm Site Condition JK410Crawler Mounted Pneumatic To... |
 |
new type of efficient and versatile hydraulic rig | JKS300B Crawler Mounted Versatile Well Drilling Rig Its smaller size can be adapted to various construction sites. Rated Drilling Depth 300m Appli... |
 |
Airman Air Compressor | Airman Air Compressor Air Compressor Airman is one of the largest air compressor manufacturers in the world. Airman Air CompressorSite Condition Su... |
 |
JKC series hydraulic dry type dust collector | Dust Collector JKC series hydraulic dry type dust collector is specially designed for JK'sDTH drilling rigs. It substantially extends drilling rig'... |
 |
Newly designed CM458 Crawler Mounted DTH Drilling Rig | CM458Crawler Mounted DTH Drilling Rig Crawler Mounted Hydraulic DTH Drilling Rig , Advanced Technology, easy to handle and operate. Borehole Diamet... |
Same products
 |
YZH固定式碎石机械臂系统 | 卖方: 山东伊润基础工程有限公司 | 对于固定应用，我们提供高级电源模块。该装置配备有电动机、液压泵和内置过滤器的油箱。对于我们的机器，我们提供手动和远程转向系统。标准设备的特点是手动转向，比例阀通常安装在固定式液压机械手的底座上。... |
 |
固定式机械臂 | 卖方: 山东伊润基础工程有限公司 | 为什么从山东元正行机械设备有限公司购买固定式机械臂。？拥有超过20年的专业生产经验。2.快速高效的售后服务。3.丰富的现场工作经验。4.专业且富有创造力的研发团队。5.中国价格低廉。6.中国的快... |
 |
机械臂系统 | 卖方: 山东伊润基础工程有限公司 | YZH根据您的订单提供定制的底座吊杆系统，以满足您的特定需求。我们提供全系列的底座吊杆系统，配有液压锤、控制装置和电源组，以满足您的需求。这些基座吊杆系统用于安装在废物转运站、主颚、碎石冲击和回... |
 |
破碎机系统 | 卖方: 山东伊润基础工程有限公司 | 破碎机系统是一种设计用于操纵大岩石的机器，包括将大岩石变成小岩石。它们通常用于采矿业，以去除太大或太硬而无法通过破碎机减小尺寸的超大岩石。碎石机由四个主要部件组成：液压破碎机（用于破碎岩石）、动... |
 |
破碎机械臂 | 卖方: 山东伊润基础工程有限公司 | YZH破碎机械臂有固定式和移动式两种版本。它们显著提高了操作一级破碎机的安全性，并减少了因物料堵塞破碎机而导致的停机时间。固定式液压机械手允许连接重量在150至1000公斤之间的所有品牌的吊杆。... |
