humanized design
JK590Crawler Mounted Hydraulic DTH Drilling Rig
Crawler Mounted Hydraulic DTH Drilling Rig
,
Low operation cost and humanized design.
Borehole Diameter
90-165mm
Site Condition
It is applicable to the blast hole drilling process of hydro project, open pit mining, quarrying, road construction and defense project.
Crawler Mounted Hydraulic DTH Drilling RigFeatures
Crawler Mounted Hydraulic DTH Drilling Rigare the new generation of internal combustion (electric) crawler mounted hydraulic DTHdrilling rig, the latest updated version of JK590 series.
In contrast with the last generation,they feature lower operation cost and humanized design.
They adopt a 70kW Yuchai diesel engine and hydraulic oil pump station assembly to generate power, allowing rigs to rotation, propelling, lifting, walking and angle positioning.
During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drill rigs, JK590C/JK590 consume about 40% to 50% less energy (oil or electricity), and the air displacement of matched air compressor decreases 30% to 50%.
Compared with JK590, JK590C is additionally equipped with dust collection system, and wet type dust collectoris optional once water is accessible on site.
JK590C/JK590 are mainly applicable to blasting borehole drilling process of hydro project, open pit mining, quarrying, road construction and defense project.
More information you can views
We also provide Tophammer Drilling Rigs,Water Well Drill Rig,Truck Mounted DTH Drilling Rig
|
Model |
JK590 |
|
Borehole diameter |
90-165mm |
|
Borehole depth |
50m |
|
Applicable rockhardness |
f=6-20 |
|
Workingair pressure |
|
|
Air consumption |
11-21m³/min |
|
Feeding stroke |
4138mm |
|
Rod-changing length |
3m |
|
3370 |
|
|
Rotation rate |
0-80rpm |
|
Rotation torque |
3000Nm |
|
Travlespeed |
2Km/h, 3Km/h |
|
Gradeability |
24° |
|
Power |
Yuchai70KW/Cummins74KW(optional) |
|
Electricmotor45KW |
|
|
Dustcollector(optional) |
Hydraulicdrydust collector |
|
Wetdustcollector |
|
|
Dimension (LxWxH) |
7000mmx2200mmx 2100mm |
|
Weight |
6500kg |
在线联系供应商
Other supplier products
 |
Drill Pipe | Drill Pipe When you drill deeper, you need to add the drill pipes until reach the desired depth The Drill Pipeconnect with rotation unit and hammer... |
 |
CM358A Crawler Mounted Hydraulic DTH Drilling Rig | CM358ACrawler Mounted Hydraulic DTH Drilling Rig Crawler Mounted Hydraulic DTH Drilling Rig , In contrast to the pneumatic drilling rig, energy con... |
 |
rig adopts DTH percussive hammer for penetration and compressed air for cleaning | JKS600BCrawler Mounted Versatile Well Drilling Rig Crawler Mounted Versatile Well Drilling Rig , New, efficient, and versatile Rated Drilling Depth... |
 |
JK650 All In One DTH Drilling Rig | As the outcome of JK Drilling-Atlas Copco alliance applying expertise from both sides, the outstanding All-In-One drilling rig-JK650 can offer you ... |
 |
outstanding All-In-One drilling rig-JK650 | JK650All In One DTH Drilling Rig automation All In One DTH Drilling Rig As the outcome of JK Drilling-Atlas Copco alliance applying expertise from ... |
Same products
 |
YZH固定式碎石机械臂系统 | 卖方: 山东伊润基础工程有限公司 | 对于固定应用，我们提供高级电源模块。该装置配备有电动机、液压泵和内置过滤器的油箱。对于我们的机器，我们提供手动和远程转向系统。标准设备的特点是手动转向，比例阀通常安装在固定式液压机械手的底座上。... |
 |
固定式机械臂 | 卖方: 山东伊润基础工程有限公司 | 为什么从山东元正行机械设备有限公司购买固定式机械臂。？拥有超过20年的专业生产经验。2.快速高效的售后服务。3.丰富的现场工作经验。4.专业且富有创造力的研发团队。5.中国价格低廉。6.中国的快... |
 |
机械臂系统 | 卖方: 山东伊润基础工程有限公司 | YZH根据您的订单提供定制的底座吊杆系统，以满足您的特定需求。我们提供全系列的底座吊杆系统，配有液压锤、控制装置和电源组，以满足您的需求。这些基座吊杆系统用于安装在废物转运站、主颚、碎石冲击和回... |
 |
破碎机系统 | 卖方: 山东伊润基础工程有限公司 | 破碎机系统是一种设计用于操纵大岩石的机器，包括将大岩石变成小岩石。它们通常用于采矿业，以去除太大或太硬而无法通过破碎机减小尺寸的超大岩石。碎石机由四个主要部件组成：液压破碎机（用于破碎岩石）、动... |
 |
破碎机械臂 | 卖方: 山东伊润基础工程有限公司 | YZH破碎机械臂有固定式和移动式两种版本。它们显著提高了操作一级破碎机的安全性，并减少了因物料堵塞破碎机而导致的停机时间。固定式液压机械手允许连接重量在150至1000公斤之间的所有品牌的吊杆。... |
