simpler operation JK810 All In One Hydraulic DTH Drilling Rig
JK810All In One Hydraulic DTH Drilling Rig
high efficiency All In One DTH Drilling Rig
With less price and more equipment, JK810, the most cost-effective representation product of JK Drilling and Atlas Copco as the solution to the integration of drilling rig and air compressor, is set to revolutionize your imagination.
JK810All In One Hydraulic DTH Drilling Rig, which brings you more automation, higher working efficiency, better reliability and simpler operation. The FOPS-approved cabin and automatic pipe handling system come standard. Heavy-duty undercarriage with wide tracks ensures both extreme maneuverability and improved safety. The hydraulic dust collecting system meets the latest environmental protection regulations and it's a reliable solution to realize the modern green mining.
hydraulic drilling rig,hydraulic drill rig
|
General |
Weight |
kg |
14300 |
|
Length |
mm |
9920 (transport) |
|
|
Width |
mm |
2400 |
|
|
Height |
mm |
3300 |
|
|
Undercarriage |
Track width |
mm |
350 |
|
Ground clearance |
mm |
≥400 |
|
|
Track oscillation |
° |
±10° |
|
|
Walking speed |
km/h |
2 (low) / 3 (high) |
|
|
Grade ability |
° |
20° |
|
|
Engine |
Model |
||
|
Type |
Water-cooled six-cylinder EFI diesel engine |
||
|
Rated power |
kw/rpm |
264/2100 |
|
|
Fuel tank capacity |
L |
450-500 |
|
|
Air compressor |
Model |
Atlas Copco two-stage rotary screw air compressor |
|
|
Working pressure |
bar |
20 |
|
|
m3/min |
|||
|
Rotary motor |
Rotation rate |
rpm |
0-85 |
|
Nm |
3300 |
||
|
Feeding method |
Hydraulic motor + Chain |
||
|
Feeding force |
kN |
12 |
|
|
Lifting force |
kN |
18 |
|
|
Feed |
Feeding stroke |
mm |
3850 |
|
Feed extension |
mm |
1100 |
|
|
Drill pipe changer |
Drilling diameter |
mm |
Φ90 - Φ150 |
|
Drilling depth |
m |
21 |
|
|
Pipe diameter |
mm |
Φ76 |
|
|
Pipe length |
m |
3 |
|
|
Pipe capacity |
piece |
6+1 |
|
|
Hammer specs |
4" - 5" |
||
|
Dust collector |
Collecting method |
Hydraulic dust collecting |
|
在线联系供应商
Other supplier products
 |
versatile hydraulic drill rig | JKS400BCrawler Mounted Versatile Well Drilling Rig Crawler Mounted Versatile Well Drilling Rig New, efficient and versatilehydraulic drill rig Rat... |
 |
Drill Pipe | Drill Pipe When you drill deeper, you need to add the drill pipes until reach the desired depth The Drill Pipeconnect with rotation unit and hammer... |
 |
JKS500C Crawler Mounted Versatile Well Drilling Rig | JKS500CCrawler Mounted Versatile Well Drilling Rig Crawler Mounted Versatile Well Drilling Rig , A new, efficient, and versatile hydraulic percussi... |
 |
JKCS600 Truck Mounted Well Drilling Rig | JKCS600Truck Mounted Well Drilling Rig Truck Mounted Well Drilling Rig ,, A new, efficient and versatile well drilling rig Rated Drilling Depth 600... |
 |
JKS300B Crawler Mounted Versatile Well Drilling Rig | JKS300B Crawler Mounted Versatile Well Drilling Rig Its smaller size can be adapted to various construction sites. Rated Drilling Depth 300m Appli... |
Same products
 |
YZH固定式碎石机械臂系统 | 卖方: 山东伊润基础工程有限公司 | 对于固定应用，我们提供高级电源模块。该装置配备有电动机、液压泵和内置过滤器的油箱。对于我们的机器，我们提供手动和远程转向系统。标准设备的特点是手动转向，比例阀通常安装在固定式液压机械手的底座上。... |
 |
固定式机械臂 | 卖方: 山东伊润基础工程有限公司 | 为什么从山东元正行机械设备有限公司购买固定式机械臂。？拥有超过20年的专业生产经验。2.快速高效的售后服务。3.丰富的现场工作经验。4.专业且富有创造力的研发团队。5.中国价格低廉。6.中国的快... |
 |
机械臂系统 | 卖方: 山东伊润基础工程有限公司 | YZH根据您的订单提供定制的底座吊杆系统，以满足您的特定需求。我们提供全系列的底座吊杆系统，配有液压锤、控制装置和电源组，以满足您的需求。这些基座吊杆系统用于安装在废物转运站、主颚、碎石冲击和回... |
 |
破碎机系统 | 卖方: 山东伊润基础工程有限公司 | 破碎机系统是一种设计用于操纵大岩石的机器，包括将大岩石变成小岩石。它们通常用于采矿业，以去除太大或太硬而无法通过破碎机减小尺寸的超大岩石。碎石机由四个主要部件组成：液压破碎机（用于破碎岩石）、动... |
 |
破碎机械臂 | 卖方: 山东伊润基础工程有限公司 | YZH破碎机械臂有固定式和移动式两种版本。它们显著提高了操作一级破碎机的安全性，并减少了因物料堵塞破碎机而导致的停机时间。固定式液压机械手允许连接重量在150至1000公斤之间的所有品牌的吊杆。... |
