350m Drilling depth Water Well Drilling Rig
- Double motor drive rotation, large torque, small size, adjustable speed.
- Adopt triple gear pump to ensure the oil pump is durable and reliable.
- Combined platform, beautiful design, equipped with pedals, easy to operate.
- Equipped with clutch and auxiliary radiator, suitable for areas with high altitude and cold climate.
- German technology walking motor; high torque and climbing ability, low failure rate.
- Dual systems can be installed: 1. Pneumatic system with air compressor 2. Mud pump system with mud pump.
Optimal Hole Range: φ140-325
Hole depth.Max: 350m
| The weight （T） | 8.6 |
|---|
| The hole diameter （mm） |
140-325 |
| Drilling depth （m） |
350 |
| One-time advance length （m） |
6.6 |
| Walking speed （km/h） |
2.5 |
| Climbing angles （Max.） |
30 |
| Equipped capacitor （kw） |
91 |
| Using air pressure （MPA） |
1.7-3.4 |
| Air consumption （m³/min） |
17-36 |
| Swing speed（rpm） |
66-135 |
| The penetrationefficiency （m/h） |
15-35 |
| Drill pipe diameter （mm） |
φ89 φ102 |
| Drill pipe length （m） |
1.5m 2.0m 3.0m 6.0m |
| Rig lifting force （T） |
22 |
| Rapid rise speed （m/min） |
18 |
| Fast feedingspeed （m/min） |
33 |
| Width of loading（m） |
2.7 |
| Hoisting force of winch （T） |
2 |
| Swing torque （N.m） |
6200-8500 |
| Dimension （mm） |
6000×2000×2550 |
| Equipped with hammer |
Medium and high wind pressure series |
| High leg stroke （m） |
1.4 |
Other supplier products
|
|
416T-1 Φ90-115mm Separated DTH Borehole Mining Blasting Drill Rig |
This series of separated DTH drill rigs had been mainly operating at middle or small sized quarries, cement mine, open-pit coal mines and prelimina... |
|
|
600m Global Sales Hydraulic Core Drill Rig |
Reliable performance： According to the guidelines for international procurement of key auxiliary equipment, diesel engines, hydraulic pumps, main v... |
|
|
|
It is an efficient and multifunctional groundwater drilling equipment, which can be used for drilling water wells, agricultural irrigation wells,... |
|
|
420B-1 Φ90-127mm Hydraulic Borehole Drilling Machine separated Surface Dth Drilling Rig |
This series of separated DTH (Down-the-Hole) drill rigs has been primarily used in small and medium-sized quarries, cement mines, open-pit coal min... |
|
|
421H Φ90-127mm Surface Mine Infrastructure Construction Integrated Dth Surface Drill Rig |
This model is equipped with a larger two-stage screw air end, which meets the requirements for an optimal hole diameter of 90–115 mm. When dr... |
供应产品
Same products
