300m Drilling depth Factory Price Water Well Drilling
- Equipped with a 85KW Yuchai brand turbocharged engine with strong power;
- The patented design of the composite tower, the stroke is 6.6 meters, the double oil cylinder lifts, and the tonnage is large
- The main arm of each drilling rig is equipped with a block to protect the oil cylinder;
- Drilling rig chassis: professional excavator chassis, durable, strong bearing capacity, wide chain plate, less damage to hard roads.
- Parallel gearbox design, independent oil pump, sufficient power, reasonable distribution, unique hydraulic system design,Simple maintenance and low cost
- The walking motor has a reducer, which is durable and has a long service life;
- Quick distribution valve: the speed of the third gear can reach 150-160 rpm, which basically realizes the dual-purpose function of water and gas
- Each hydraulic hose is covered with a soft management kit for longer hose life.
- The power of the drilling rig is driven by a diesel engine. The rig walks, rotates, pushes, lifts, outriggers and unloads.The levers are all hydraulically controlled.
- The drilling rig walks with a crawler-type self-structure, which is convenient to move. Its steel tracked chassis,It’s easy to walk around town and in the yard and doesn’t damage the ground easily.
- High-strength hydraulic outriggers can adjust the level of the drilling rig quickly and stably, and are convenient for loading and unloading.
- Special wellhead setting provides a certain drilling center to ensure vertical drilling positioning accuracy.
- The mechanical positioning of the trolley and the frame improves the stability of the trolley
- The pneumatic system has a customized oiler to lubricate the impactor, which effectively increases the service life of the impactor.
- Dual systems can be installed: 1. Pneumatic power system with air compressor 2. Mud pump system with mud pump
Optimal Hole Range: φ140-325
Hole depth.Max: 300m
| The weight （T） | 6.8 |
|---|
| The hole diameter （mm） |
140-325 |
| Drilling depth （m） |
300 |
| One-time advance length （m） |
3.3 |
| Walking speed （km/h） |
2.5 |
| Climbing angles （Max.） |
30 |
| Equipped capacitor （kw） |
85 |
| Using air pressure （MPA） |
1.7-3.0 |
| Air consumption （m³/min） |
17-36 |
| Swing speed（rpm） |
40-70 |
| The penetrationefficiency （m/h） |
15-35 |
| Drill pipe diameter （mm） |
φ76 φ89 |
| Drill pipe length （m） |
1.5m 2.0m 3.0m |
| Rig lifting force （T） |
18 |
| Rapid rise speed （m/min） |
22 |
| Fast feedingspeed （m/min） |
40 |
| Width of loading（m） |
2.6 |
| Hoisting force of winch （T） |
2 |
| Swing torque （N.m） |
5700-7500 |
| Dimension （mm） |
4100×2000×2260 |
| Equipped with hammer |
Medium and high wind pressure series |
| High leg stroke （m） |
1.4 |
Other supplier products
供应产品
Same products
