全自动包装码垛线 无锡航一机械有限公司 全自动灌装包装线
无锡航一机械有限公司 全自动包装码垛线
全自动包装码垛线
全自动包装线
全自动装袋线
全自动灌装包装线
自动装袋系统 自动装袋机
由无锡航一机械有限公司生产。
应用：
这是无锡航一机械有限公司生产的全自动包装码垛线、全自动包装线、全自动装袋线、全自动灌装包装线、自动装袋系统。进料灌装、自动称重装袋、自动进袋和袋顶封口、自动袋输送输送机、机器人前自动空托盘进料、带托盘分配器的自动机器人码垛在托盘上堆垛、装载托盘输送机、自动托盘包装等。全自动完成，连续工作。
并可选择安装翻袋机、整形机、压平机、重检机、金属检测机、剔除系统、打印机、码垛机等，组成无锡航一机械有限公司生产的一条完整的全自动装袋生产线。
技术参数
型号：LCS-HYA系列
工作地点：室内
称重范围：1~100kg，定制
准确度：±0.2%以内
产能：180-220袋/小时、300-360袋/小时、500-700袋/小时、700-1000袋/小时
电源：AC110-240V/220-600V，50/60Hz，1/3P，根据当地电气系统定制
功率：10~18kW，视包装速度容量及配套设备而定。
气源：0.55～0.65Mpa，6bar；
耗气量 : ～100 Nm3/h
袋带输送机尺寸：5000*400mm，定制设计。
主要部分
送袋机
约200个空袋装在2个水平板中（空袋数量视袋厚而定），由真空吸盘完成供袋。取一个空袋后，带多个空袋的盘子移动到取袋位置，使设备连续稳定运行，无锡航一机械有限公司生产。
袋位调整
调整空袋整体位置。
拿空包
取出供袋机的空袋。
水平移动
将空袋移至进料口。
打开空袋
将空袋移至进料口，然后用真空吸盘打开袋口。
夹袋送料机构
空袋由进料口下方的夹袋机构夹住，然后进料门插入袋中并开始进料。
过渡料斗和二次进料门
过渡料斗是计量机构和包装机之间的过渡部分。双进料门的主要作用是在进料过程中起缓冲作用，减少物料中的空气含量。
袋底拍打机构
物料装满袋子后，该机构拍打袋底，使物料完全落下袋底。
袋横移袋口夹紧机构
装有物料的袋子从进料口放到立袋输送机上，由袋口夹紧机构夹紧，直至到达封口部位
立袋输送机
装有物料的袋子以相同的速度输送，输送高度可通过高度调节手柄改变。
并可选择安装翻袋机、整形机、压平机、重检机、金属检测机、剔除系统、打印机、码垛机等，组成无锡航一机械有限公司生产的一条完整的全自动装袋生产线。
机器人码垛机
描述
机器人码垛机采用先进的码垛机器人进行码垛。结构简单、占地面积小、操作简单、功耗低、维护方便。采用触摸屏操作。
机器人码垛机广泛应用于包装机械行业。最新款机器人码垛机具有结构简单、体积小、重量轻、速度快、更安全、节能、美观、省电等特点，可显着缩短生产线长度，减少设备数量，简化工作程序。通过设置，机器人将能够完成尼龙（纸）袋、塑料袋、纸箱、塑料容器、玻璃瓶等的卸料和码垛任务。
技术参数：
型号：ABB/川崎/埃斯顿
抓取范围：10-50kg袋装，按要求定制
码垛能力：定制，与自动包装机线匹配。
机械结构：多关节机器人
动作方式：圆柱坐标式
抓手：指型
堆叠记忆容量：标准30种（最多400种）
堆叠高度：max.2300mm
堆叠宽度：max.1500mm
控制方式：PLC
方形面积：L 2000mm×W4000mm
堆栈类型结构：定制
堆叠形式：根据用户需要，单/双工位。
无锡航一机械有限公司
Fully Automatic Packing Palletizing Line Robot palletizer packing machine MOBILE CONTAINERIZED BAGGING MACHINE bagging machineAutomated Bagging LineFully Automatic Packing & Palletizing Line
Fully Automatic Packing Line
Fully Automatic Bagging Line
Fully Automatic filling and packaging line
automated bagging system automated bagging machine
Produced by WUXI HY MACHINERY CO., LTD.
Applications:
This is Fully Automatic Packing Palletizing Line, Fully Automatic Packing Line, Fully Automatic Bagging Line, Fully Automatic filling and packaging line, automated bagging system produced by WUXI HY MACHINERY CO., LTD.This fully automatic packing line includes automatic bags placing feeder, auto materials feeding filling,auto weighing bagging, auto bags guide-in and bag top sealing, auto bags transportation conveyor, auto empty pallet feed-in before robot, auto robot palletizing with pallet dispenser for stacking on pallet, loaded pallet conveyor, auto pallet wrapping, etc.. It’s fully automatic finished and continuously working.
And it’s selectable to install the bag overturning, reshaping, flattener, weight re-checker, metal detector, rejection system, printer, palletizer, etc. to make a complete automatic bagging production line produced byWuxi HY Machinery Co., Ltd.
Technical Parameters
Model: LCS-HYA series
Working location: Indoor
Weighting Range: 1~100kg, customized
Accuracy: within ±0.2%
Capacity: 180-220bags/hour, 300-360bags/hour, 500-700bags/hour, 700-1000bags/hour
Power Supply: AC110-240V/220-600V, 50/60Hz, 1/3P,customized made as per local electrical system
Power: 10~18kW, depends on packing speed capacity & the matching devices.
Air Resource: 0.55～0.65Mpa, 6bar；
Air Consumption : ～100 Nm3/h
Bag Belt Conveyor Dimension: 5000*400mm, customized design.
Main part
Bag Supplying Machine
About 200 empty bags are put in 2 horizontal plates (the number of empty bags depends on the bag thickness), and bag supplying is finished by vacuum chuck. After one empty bag taken, the plate with many empty bags moves to the bag fetch position so that the equipment can run continuously and stably,produced by Wuxi HY Machinery Co., Ltd.
Bag Position Adjustment
Adjust the whole position of empty bag.
Take Empty Bag
Take the empty bag of Bag Supplying Machine.
Horizontal Movement
Move the empty bag to feed opening.
Open Empty Bag
Move the empty bag to feed opening, then open the pocket mouth of bag with vacuum chuck.
Bag Clamping and Feeding Mechanism
The empty bag is clamped by Bag Clamping Mechanism under the feed opening, then feeding door insert to the bag and start the feeding.
Transitional Hopper & Twice Feeding Door
The Transitional Hopper is the transitional part between the Metering Mechanism and Packaging Machine. The Twice Feeding Door’s main function is to be a cushion during feeding materials, so that reduce the air content in materials.
Bag Bottom Flapping Mechanism
After the materials filled the bag, the mechanism claps the bottom of bag to make materials fully drop down the bottom of bag.
Bag Horizontal Moving & Pocket Mouth Clamping Mechanism
The bag with materials is put on the Standing Bag Conveyor from feed opening, and clamped by the Pocket Mouth Clamping Mechanism until get to the sealing part
Standing Bag Conveyor
The bag with materials is conveyed at the same speed, and the conveyor height can be changed with height regulating handle.
And it’s selectable to install the bag overturning, reshaping, flattener, weight re-checker, metal detector, rejection system, printer, palletizer, etc. to make a complete automatic bagging production lineproduced by Wuxi HY Machinery Co., Ltd.
Robot palletizing machine
Description
Robot palletizer adopts advanced palletizing robot for stacking. Simple structure, small covering space, simple operation, low power consumption and easy maintenance. Using touch-screen operation.
Robot palletizer is widely used in the packaging machinery industry. The latest robot palletizing machine has the features of simple structure, small size, light weight, faster speed, more safety, energy-saving, good looking, less power, etc. And it can significantly shorten the length of the production line, reduce the amount of equipment and simplify the work procedures. Through setting, the robot will be able to complete the task of discharging and palletizing nylon (paper) bags, plastic bag, cardboard box, plastic containers, glass bottles, etc.
Technical Parameters:
Model: ABB / Kawasaki / Estun
Grasping scope: 10-50kg bag, customized as per requirement
Palletizing capacity: customized, matching with the automatic packing machine line.
The mechanical structure:Multi-joint robot
Action mode:cylindricalcoordinatetype
Graspinghand:fingertype
Stackingmemorycapacity: standard30kinds (up to400 kinds)
Stack height: max.2300mm
Stack width: max.1500mm
Control Method : PLC
Square area: L 2000mm×W4000mm
Stacktypestructure:customized
Stack form: According to the user’s needs, single/double station.
