Roll Die Punching Machine Inline Flexo Printer
Roll platen die punching machineinline Flexo Printer based on international advanced technology, it’s widely used in paper cup, paper bowl and paper plate and other paper products. It adopts micro-computer, human-computer control interface, servo positioning, alternating current frequency converter, photoelectric correcting deviation system, centralized oil lubrication, inline flexo printing.
Features of Roll Die Printing and Punching MachineInline Flexo Printer
Anilox Roller To Spread Ink
Adopt The Anilox Roller To Spread Ink
Unwinding Tension
Unwinding tension is controlled by automatic tension controller from Japan Mitsubishi.
Printing Unit
Each printing unit adopts 360°for registration.
IR Dryer
Each printing unit have one IR dryer.
Rubber Roller
The rubber roller can break away automatically while parking, and run at a low speed in order to avoid ink being dry.
Main Motor
The main motor is adopted the import step-less regulation of frequency conversion.
Process
Web guiding, printing, IR drying and punching can be finished in one process.
Specification of Roll Die Punching Machine Inline Flexo Printer
|
Model |
FDYC850 |
FDYC920 |
FDYC1000 |
|
Max Paper Width |
850mm |
920 |
1000 |
|
Cutting Precision |
±0.20mm |
||
|
Paper Gram Weight |
150-400g/m² |
||
|
Production Capacity |
280・380ti mes/min |
||
|
Air Pressure Requirement |
|||
|
Air Pressure Consumption |
|||
|
Max Roller Diameter |
1500mm |
||
|
Flexo Print Units (IR dryer) |
2-6 Colors |
||
|
Web Guiding |
1 |
||
|
Printing Repeat Length |
10" - 22.5" |
||
|
Gear Pitch |
1/8” (3.175mm) |
||
Highlights of Roll Die Punching Machine Inline Flexo Printer
01
Stronger
It adopts a micro-computer, human-computer control interface, direct connection servo positioning which make higher accuracy, and we make the wallboard, base much stronger than others. It guarantees that when the machine runs up to 380 strokes/min without any shaking.
02
Lubrication System
Adopting a forced lubrication system to ensure the main driving oil supply is regularly and reduce friction and prolong the machine life, you could set it to lubricate 10 seconds every 6 minutes.
03
Die-cutting Force
The die-cutting force is provided by a 5.5KW inverter motor. It is not only power-saving, but also can realize the step-less speed adjustment, especially when coordinate with the extra-large flywheel, which makes the die-cutting force strong and steady, and the electricity can be further reduced.
We adopt two swing arm cams which are much easier to adjust and operate when you change the punching mould, and it has higher stable pressure and high performance.
04
The Coordination Between Stepping Motor And Photoelectric Eye
The coordination between the stepping motor and the photoelectric eye which can identify colours assures the perfect fit of the die-cutting position and figures.
05
Electrical Cabinet
Frequency converter controls the main motor, with features of low energy and high efficiency. PLC and HMI: screen display the running data and status, all of the parameter can be set through the screen. Electrical Control System: adopts microcomputer control, encoder angle detect and control, photoelectric chase and detect, achieving from paper feeding, convey, die punching and delivering process automatic control and detect. Automatic Tension Control can control the paper tension automatically.
06
Feeding Unit
Adopting chain type pneumatic roller unwind, tension controls unwind speed, and that's hydraulic, it could support at 1.5T paper. Max roll paper diameter is 1.5m.
07
Die Cutting Mold
As a packaging machinery company, we adopt swiss material that could be used for at least 400 million strokes, and if the mould can’t cut well, you could sharpen the blade by a flat grinding machine, it could be sharpened 4-5times.
Each punching mould in one cavity is divided into 4 pieces which can be adjusted easily.
If you want to know more kinds of flat bed punching machine, please visit our website.
在线联系供应商
Other supplier products
 |
Automatic High-speed Window Patching Machine | The automatic High-speed Window Patching Machine is the special equipment for carton box colour box window lamination. They are advanced models in ... |
 |
Drying type Water-based and Thermal Film Laminator | Drying type Water-based and Thermal Film Laminator Heat roll lamination machineadopts a circling oil heating system equipped with a big diameter o... |
 |
Automatic High-speed Multi-function Folder Gluer Machine | Growing, as a reliable packaging machinery company, which is an enterprise of brave to challenge and actively innovate, focuses on the manufacturin... |
 |
High Speed Servo Drive PC Rotary Cutting Machine | This big paper cutter machineis suitable for cutting the large coil packaging material, such as paper, paper-plastic complex material and colour pr... |
 |
Intelligent Stacker Machine | Using Automatic Tools The high-end intelligent type can be equipped with an automatic tray, which can automatically exit the warehouse and connect... |
