Thermal Chamber
Thermal Shock Test Chamber Thermal Shock Test Chamber can be used in the temperature shock test and fast-changing temperature test in a wide range such as aviation,Website:, air space, electronic components and material research. The High and Low Temperature Thermal Shock Chamber consists of three separate chambers: high temperature chamber, low temperature chamber and test chamber.Operation PrinciplesThe specimen is placed in test chamber specimen which cannot be placed in high temperature chamber or low temperature chamber. High temperature chamber pre-heats the air and low temperature air chamber pre-cools the air. When doing the test of temperature changing from high to low, the low temperature chamber will blow the pre-cooled air to the test chamber. Then, the air in test chamber will reach your target temperature in several minutes ("recover time"). When doing the test of temperature changing from low to high, the high temperature chamber will blow the pre-heated air to the test chamber. Then the air in test chamber will reach your target temperature within the recover time. ;Main Technical Parameters ; • Test chamber size (D×W×H) 800×800×800 mm
• External Size (D×W×H) 2500×1580×2200 mm
• Temperature range in high temperature chamber: Ambient temperature ～+150℃
• Temperature range in low temperature chamber: Ambient temperature ～ -70℃
• Temperature deviation ≤±2℃
• Temperature fluctuation ≤±0.5℃
• Temperature range in test area -55～ +100℃
• Temperature resuming time ≤5 mins
• Temperature Setting Accuracy 0.1 ℃
• Refrigerating Mode air coolingChamber Structure • External Material: BAO STEEL cold-rolled electrostatic sprayed steel plate
• Test Area Material: ThyssenKrupp SUS304 stainless steel plate
• Insulation material: Superfine glass wool, at least 100mm thick
• Window: An electroplate heating vacuum frost-proof glass window on the door
• Illumination: Domestically-made illumination lights
• Door: Single-door, flat handlebars
• Door seal: Freeze & high temperature resistant door seal
• Test/wire hole: a ф50mm stainless steel wire hole together with a lid on the wall of test chamber
• Water Outflow: Hole There is a water outflow hole at the bottomRefrigerating System • Refrigerating compressor: TECUMSEH totally-closed hermetic compressor imported from France; mechanical refrigeration.
• Refrigerant: R404a and R23 refrigerant
• Refrigerating mode: Air-cooling
• Condenser: Domestically-made plate-type dipole condenser
• Other refrigerating components: expansion relief valve, electromagnetic control valve, drying filter, pressure controller, oil separatorHeating System • Controller of the heater: SSR solid-sate relay
• Heater: Nickel-chromium alloy heating wire, and electric relay with over-heat protectionAir-circulation System • Air circulation mode: Compulsory air circulation and Balance
• Blower: Stainless steel long-axial fanControlling System • Controller: LCD-touch screen intellectual programmable temperature controller
• Imported from South Korea with PID function that automatically corrects deviation
• Controller language: English and digits
• Display of controller: temperature deviation, system parameters, program curve, operating time, Status of the heater……
• Setting Accuracy: Temperature:0.1 ℃ ;Time:1min
• Operating mode: Automatic programmable and Manual constant
• Program volume: 1～120 programs,no more than 1200steps, each step has 99 hour 59mins, each program can be linked, Each program can cycle for 999 times
• Maximum test data and storage time: 10 yearsMeasuring System • Temperature sensor: Pt100platinum electric resistance
• Other controlling components: SCHNEIDER, OMRON, DELIXI or SIEMENS AC contactor, thermal, overload relays, intermediate relay, signal and switch, breaker
Other supplier products
|
|
|
Customized LED Integrating Sphere for Optical Measurement Diameter: IS-0.3M (φ0.3m)、IS-0.5M (φ0.5m)、IS-1.0M (φ1.0m)、IS-1.5M (φ1.5m)、IS-1.75M (φ1.75... |
|
|
|
Thermal Shock Test Chamber Thermal Shock Test Chamber can be used in the temperature shock test and fast-changing temperature test in a wide range ... |
|
|
|
IEC 61000-4-5 Lightning Surge Generator with 1.2/50μs 0~12KV Voltage Automatic lightning surge generator (or Lightning surge immunity) SG61000-5 is... |
|
|
|
IEC 60529 DIN40050 and IP5K0 Dustproof Sand and Dust Test Chamber for IP5X and IP6X The Dustproof Sand and Dust Test Chamber SC-015 is according to... |
|
|
|
IEC 60695-2-2 IEC 60695-11-5 Needle Flame Test Apparatus With 45° Burner According to IEC60695-2-2 and IEC60695-11-5,Website:, ZY-3 Needle Flame Te... |
供应产品
Same products
