IEC 61000-4-12 Ring Wave Generator With 0~6KV Voltage
IEC 61000-4-12 Ring Wave Generator With 0~6KV Voltage Ring Wave Generator is the test equipment in conformity to IEC (the International Electro technical Commission) standard IEC61000-4-12,Website:, EN61000-4-12, ANSI-C62-41 and GB/T17626.12. This instrument is used for the simulative electrical network, the power supply of the reactive load and the control line switch, as well as sensing the ring wave of the low voltage cables terminal equipment caused by the disconnection of the power circuit, fault and insulation breakdown or lightning stroke. The RWG61000-12 series products have LCD display in both English and Chinese.Specification:ProductModelRWG61000-12RWG61000-12TRWG61000-12ARWG61000-12ATOutput Voltage0~4KV0~6KVVoltage/Current WaveOpen circuit voltage wave: frontier: 0.5μs±20%. Short circuit current wave: frontier: ≤1μs. Oscillation frequency: 100kHz±10%PolarityPositive, Negative or Positive/Negative automaticPhase ShiftAsynchronous, Synchronization 0°~360° or Specific AngleOutput Impedance12Ω, 30Ω, 50Ω ± 20%Coupling/Decoupling Network (CDN)Includes a 16A single phaseIncludes a 20A 3phases/5wiresIncludes a 16A single phaseIncludes a 20A 3phases/5wiresWorking PowerAC220V(Option 110V)±10%, 50/60HzDimension (DxWxH)44x45x35cm44x45x20cm 44x45x35cm(CDN)44x45x30cm 44x45x20cm(CDN)44x45x30cm 44x45x35cm(CDN)Gross WeightAbout 28kgAbout 46kgAbout 45kgAbout 48kgTouch screen with super big LCD and built-in Windows CE Waveform:
Other supplier products
|
|
|
ANSIUL94,Website:, IEC 60950-1, IEC 695-2-2 Horizontal Vertical Flame Test Equipment Horizontal Vertical Flame Test Equipment meets the requirement... |
|
|
|
Goniophotometer for Light Intensity Measurement LSG-1800/LSG-1700/LSG-1600 Goniophotometer for Light Intensity Measurement is high precision automa... |
|
|
|
IEC 61000-4-5 Lightning Surge Generator with 1.2/50μs 0~12KV Voltage Automatic lightning surge generator (or Lightning surge immunity) SG61000-5 is... |
|
|
|
IEC 60068-2-52,Website:, ASTM-B368, MIL-STD-202, EIA-364-26, ASTM-B117 Salt Spray Test Chamber The Salt Spray Test Chamber is applicable to the sal... |
|
|
|
EN55015 EN55022 9kHz~300MHz EMI Receiver System KH3962 is an automatic EMI receiver system. It is a main test system for EMI (Electro Magnetic Inte... |
供应产品
Same products
