IEC 61000-4-4 EFT Burst Test Equipment
IEC 61000-4-4 EFT Burst Test Equipment EFT Burst Test Equipment EFT61000-4 is specially designed according to the characteristics and requirements of EFT measurement and it is an ideal disturbance source of EMS measurement. They have fine performance,Website:, such as high stability, high reliability, easy to use etc. It meets the standard requirements of IEC 61000-4-4, EN 61000-4-4, GB/T17215.301, GB/T17215.322 and GB/T17626.4. EFT61000-4 has LCD display in both English and Chinese. Specification:
• Output voltage: 0～5000V
• Pulse frequency: 1kHz~1000kHz (Adjustable)
• Polarity: Positive, Negative or Positive/Negative automatic
• Source impedance: 50Ω±20% and 1000Ω±20%
• Rise time of a pulse: 5ns±30%
• Pulse width at 50Ω: 50ns±30%
• Pulse width at 1kΩ: 35ns~150ns
• Burst duration: 0.01ms~20ms
• Burst period: 100ms~500ms
• Test time: 1s~9999s
• Testing functions: Set test mode freely or IEC Level
• Coupling/Decoupling Network: Built-in 20A with 3 phases/5 wires
• Working Power: AC220V (Option 110V) ±10%, 50/60Hz Touch screen with super big LCD Waveform:
Other supplier products
|
|
|
Luminous Flux,Website:, CCT, CRI LED Light Tester System LPCE-3 is a Luminous Flux, CCT, CRI LED Light Tester System. It is suitable for photometri... |
|
|
|
Programmable Insulation Test with Voltage AC0.3~5KV DC0.3~1KV The Programmable Insulation Test is a high-performance testing device special for wit... |
|
|
|
IEC60695-2-1,Website:, IEC60695-2-10~IEC60695-2-13 Glow-wire Test Apparatus Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10~I... |
|
|
|
IEC 60695-2-20 Hot Wire Ignition Test Apparatus Hot wire ignition tester is according to the standard requirement of IEC60695-2-20 and GB4943,Websi... |
|
|
|
EN55015 EN55022 9kHz~300MHz EMI Receiver System KH3962 is an automatic EMI receiver system. It is a main test system for EMI (Electro Magnetic Inte... |
供应产品
Same products
