Inductive Proximity Switch For Sale
1、DescriptionIPS series inductive proximity switch is also named non-contact switch, or static position switch. The oscillator of the switch is consists of the coil and other elements. The inductive probe creates an alternating field when the oscillator. When metal target enters the field, the eddy current induced in the metal target, which will cause blocking of oscillator, or small oscillation. And the signal will be shaped, amplified and converted to electrical signal, which will drive the switch tube on and cut-off to realize the detection.It will create signal when the object approach the proximity switch without external force. IPS series inductive proximity switch has more functions, not just limited to the distance control and limit position protection. The proximity switch can be used for high speed counting, metal detection, speed measurement, level control, and components size measurement and used as contactless button, etc.2、Features and ApplicationsFeatures:1. Stable performance, reliable action, fast response frequency and long service life2. Water proof, shock proof and corrosion resistance.Applications:The target object for IPS series inductive proximity switch must be conductor. IPS inductive proximity switch has the features of travel switch and micro switch and can be used as position sensing, control and detection in industrial environment. IPS series inductive proximity switch are widely used in many fields, such as light industrial machinery, packing machinery, metallurgical equipment, electrical equipment, textile machinery, etc.3、Technical ParametersItemParameterModelIPS-D2-3P-M1243-M12Mounting ThreadM12×1.0Voltage (Vdc)10-36Rated Current(mA)150（50℃）125（80℃）Sensing Distance(mm)2Accuracy (mm)±10 %Insulation Resistance10MΩ（DC500V）Output ModePNPProtection GradeIP67Operating Temperature-25～+80Position IndicatorLEDHousing MaterialBrass; PCOutput ModeConnector M124、Product Photograph5、Product Dimension6、Product Dimension1. Avoid hitting, knocking and falling off during the transportation and using period. Use the insulating transformer, not the auto-transformer.2. Although the sensing object is ferrous material, the nonferrous metal can also be detected within smaller detection distance (Brass 70%, Aluminum 40%). And the object thickness should be no less than 1mm and the size should be no less than the square of the inductive probe outer diameter. The installation air gap is 1-1.5mm. Please follow below drawing for minimum air gap when install towards the metal or on the metal object.The sensor mounted must be over 15mm air gap from the metal parts.Sensor is immersed in the metal, the air gap from sensor to the metal wall must be over 10mm.The mounted sensor each other must have an air gap that is over 15 mm.
Other supplier products
|
|
|
ItemsContentsPower supplyDC+5 to +30V; ripple 2% max.Power consumption35mA max. (at DC+24V)70mA max. (at DC+12V)75mA max. (at DC+5V)Operating Tempe... |
|
|
|
When the Flow Alarm detects high or low liquid flow, it raises the alarm with a loud beeper and flashing LED. Flow Alarm detect low flow When power... |
|
|
|
1、DescriptionIPS series inductive proximity switch is also named non-contact switch, or static position switch. The oscillator of the switch is con... |
|
|
|
Particular IntroductioFSP-60-1 Series Paddle Flow SwitchesProduct Code Number: FSP-60-1Product Code Number: FSP-60-2Mounting Threads: 1/2" NPT for... |
|
|
|
SpecificationsInductive sensors are used when the target is metal. These are the most widely used switches in industry today. Proximity switches ar... |
供应产品
Same products
