PVB Interlayer Boiling Test Device

Function: Determining the effect of exposure of safety glazing materials to temperature and humidity condition by boiling.

Related Standard:

1. EN ISO 12543 – 4 Glass in building -Laminated glass and laminated safety glass – Part 4: Test methods for durability – Clause 5 High-temperature test
2. AS/NZS 2208 Safety glazing materials in buildings – Appendix F Boil Test
3. ANSI Z97.1 Safety Glazing Materials Used in Buildings – Safety Performance Specifications and Methods of Test – Clause 5.3.2 – ( 1 ) Boil Test

Technical Data:

Outside Size: 500mm*300mm*580mm

Inner Size: 395mm*260mm*495mm

Working Voltage and Frequency : AC220V/50HZ

Power: 3KW

Apparatus:The apparatus include two water baths and one temperature control device, each water baths is of sufficient size to hold the test specimen fully immersed vertically on edge for the duration test.

Principle:Specimens are immerse in hot water and boiling water for specified period of time and inspect bubbles and other defects

Working Environment:

Temperature: 20℃±5℃

Atmospheric Pressure: 8.60×10⁴Pa-1.06×10⁵Pa

Relative Humidity: 40%-80%

Instructions:

1, Place the boil test equipment stably, and put the sample holder into the box;

2, Pour water into box, control the water level is about 50-80mm from the top of the box, cover the box;

3, Switch on the power supply, set the temperature-controlled meter to required temperature (63~69°C).

4, When the temperature reach the required temperature (63~69°C), place the samples vertically on the sample holder inside the box,3 minutes later, take out the samples and quickly put them into another boiling test box, after 2 hours, take out the samples and observe.

5, Disconnect the power supply, drain the water after cooling.

Matters needing attention：

1, check whether the box is deformed or damaged before use.

2, check the water level in the box before switching on the power supply.

3, keep the box dry and maintain regularly when it is not used for a long time.

4, it is normal to have a little scale after heating for a long time. Please clean up in time so as not to affect the heating effect.

Packing details:

Plywood case （Meet import and export requirements）

Packing Size: 650mm*535mm*900mm

Total Weight: 49kg

Other supplier products

	Safety Glass Impact Test Machine	Impact Testing Equipment Testing Machine for Mechanical Properties of Tempered Glass Shot Bag 1)Weight:45kg±0.1kg 46kg±0.1kg 2)...
	Hard and Soft Pendulum Shock Device for Lifts	Hard and Soft Pendulum Shock Device for Lifts Related Standard: GB 7588-2003 Safety rules for the construction and installation of electric lifts ...
	BS EN 12600 双轮胎冲击体	参考标准: BS EN 12600:2002建筑用玻璃。摆锤试验。平板玻璃的冲击试验方法和分类 技术数据: 1)充气轮胎冲击器: 重量:50kg±0.1 kg 胎压:0.35Mpa±0.02Mpa 轮胎类型:3.50-R8 4PR 样品尺寸:876 mm&plus...
	Flatness Meter(Measuring Span 500 mm)	Flatness Meter (Measuring Span 500 mm) Function:Measurement of arcuate form and wave form of tempered glass Related Standard: 1) GB 15763.2 Safety ...
	Roller Wave Tester for Tempered Glass	Roller Wave Tester For Tempered Glass Function: Measurement of arcuate form and wave form of tempered glass Related Standard: 1) GB 15763.2 Safety ...

供应产品

Same products

	FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter	卖方: Phonefix	FNIRSI FNAC-28 Multifunctional 2 in 1 Type-C USB Tester Digital Voltmeter Ammeter Amperimetor Vol...
	WF-EDU-02 Motor & Propeller Test Kit	卖方: Wing Flying Technologies Co., Ltd	WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare...
	WF-EDU-01 Motor and Propeller Test Kit	卖方: Wing Flying Technologies Co., Ltd	WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ...
	WF-EN-50 Engine Test Bench	卖方: Wing Flying Technologies Co., Ltd	Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ...
	WF-EN-15 Engine Test Bench	卖方: Wing Flying Technologies Co., Ltd	WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ...