Specific Surface Area and Pore Size Analyzer

Main Function

◆Full-functional: Specific surface area, mesopore, and micropore analysis;

◆High-throughput: Optional analysis stations (3/6/9/12);

◆Fully automatic: Degassing → Testing, fully automatic switching;

◆Anti-contamination: "Pressure-controlled heating" for micropore sample degassing to prevent contamination;

◆Zero helium contamination: Pre-heating zone with helium gas, followed by automatic degassing;

◆Auto-cycling: Automatic evaluation of material cyclic adsorption performance.

Technical Parameter◆Broad testing range: Specific surface area ≥0.0005 m²/g, pore size 0.35-500 nm;

◆Testing efficiency: Multi-point BET (excluding degassing process), standard mode 12 samples/60 min; rapid testing mode 12 samples/15 min;

◆High testing accuracy: Quantitative error of specific surface area, pore size, pore volume, and adsorption capacity <0.5% RSD (based on standard sample BET value);

◆Temperature-programmed degassing: Software-controlled temperature programming, room temperature to 400°C, accuracy better than 0.1°C;

◆Intelligent degassing completion judgment: Software-supported automatic judgment based on pressure changes to evaluate degassing effectiveness;

◆Anti-dust degassing: Pressure-controlled heating + pressure-controlled vacuuming to completely eliminate sample dusting during degassing;

◆Vacuum level: 10⁻² Pa;

◆High reliability: International supplier system, core components imported with original packaging.

Other supplier products

	Wire Cut - through Tester for Ford Automotive Wires	Applicable Standard: Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA Technical Parameters: 1. Sens...
	Helmet Strap Tensile Tester	Purpose Apply a certain initial load to the helmet strap system for a certain period of time. Then, let a weight of a certain mass fall from a cer...
	Cantilever Fabric Stiffness Tester	Application: Fabric Stiffness Tester, is a practical equipment to determine the bending height, flexural rigidity and bending modulus of fabrics. ...
	Single-Flame Source Tester En ISO 11925-2	Introduction This instrument is designed according to ISO 11925-2. it is used to test building material under conditions in the absence of external...
	Geosynthetic creep tester	Scope of application: DW1290 series geosynthetics creep test system is used to determine the tensile creep properties of geosynthetics products. ...

供应产品

Same products

	WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android	卖方: China PHONEFIX Technology Co., Ltd	WYLIE WL-155 SIM卡测试仪用于检测SIM卡电路，支持iPhone 14/15/16/17 Pro Max和安卓手机的双SIM卡检测。配备LED数字显示屏，支持Type-C充电，即插...
	HCV1500高精度电压传感器	卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd	HCV1500高精度电压传感器是一种能够在原边和副边完全隔离的条件下测量直流、交流、脉冲及各种不规则波形的电压传感器。它主要用于对精度要求较高的测量验证和校准领域，以及对灵敏度、稳定性、可靠性要...
	Xenon Test Chamber	卖方: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	卖方: 上海千实精密仪器	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	卖方: 上海千实精密仪器	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...