Gravel Resistant Impact Tester
Standards
- ASTM D3170: Coating resistance to gravel impingement.
- ISO 20567: Paints and varnishes – Resistance to stone chipping.
- SAE J400: Automotive exterior component durability testing.
- EN 14425: Aerospace material impact resistance protocols.
Product Advantages
- Precision Impact Simulation: Replicates real-world gravel impact scenarios (e.g., road debris, aviation particle strikes) with adjustable speed and angle controls.
- Multi-Industry Applicability: Essential for automotive body panels, aircraft skins, train coatings, and architectural finishes.
- High-Speed Airflow System: Generates consistent particle velocities (20–120 m/s) for repeatable testing across samples.
- Modular Design: Interchangeable nozzles and sample fixtures accommodate diverse component geometries (e.g., curved automotive panels, flat building materials).
- Advanced Safety Features: Enclosed testing chamber with integrated debris shield and emergency stop function.
- Data-Driven Analysis: High-resolution camera system captures pre/post-test images for quantitative damage assessment (dents, cracks, delamination).
Product Features
- Airflow Control System: Digital regulation of air pressure (0.2–0.8 MPa) and particle velocity for standardized testing.
- Adjustable Impact Angle: 0–90° tilt mechanism to simulate horizontal, vertical, or oblique impact angles.
- Sample Fixtures: Universal clamps for securing automotive panels, aerospace composites, or building materials up to 500×500 mm.
- Touchscreen Interface: Programmable test cycles, air pressure, and impact angles with real-time data logging.
- Debris Recycling System: Integrated funnel and vacuum system for automated gravel collection and reuse.
- Safety Interlocks: Transparent enclosure with light curtains to halt operation during access attempts.
在线联系供应商
Other supplier products
 |
ozone exposure chamber manufacturer | zone test chamber Application It is suitable for a series of tests on color fastness and color fastness to airborne contaminants, such as knitted f... |
 |
Mask Bacterial Filtration Efficiency Test Machine (BFE) | Standards YY0469-2004. YY/T 0969-2013. ASTMF2100. ASTMF2101. EN14683 ect. Features 1.1、Standard test cabinet, touch screen + PLC system is easy to ... |
 |
Geomembrane Environmental Stress Cracking Resistance Tester | Scope of application: The stress cracking strength of polyolefin geomembrane was measured and evaluated by notch constant load tensile test. Durin... |
 |
Torque - to - Failure Tester for Metal Bone - connecting Screws | Standard YY/T 0662-2008(Chinese standard for orthopedic implant testing) ISO 5832-1(Metallic materials for surgical implants – Wrought st... |
 |
Total Hip Joint Prostheses Wear Tester | Standard YY/T 0651.1-2016 (China): Specifies wear testing parameters for total hip prostheses, including angular motion, loading modes, and enviro... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | 卖方: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM卡测试仪用于检测SIM卡电路，支持iPhone 14/15/16/17 Pro Max和安卓手机的双SIM卡检测。配备LED数字显示屏，支持Type-C充电，即插... |
 |
HCV1500高精度电压传感器 | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500高精度电压传感器是一种能够在原边和副边完全隔离的条件下测量直流、交流、脉冲及各种不规则波形的电压传感器。它主要用于对精度要求较高的测量验证和校准领域，以及对灵敏度、稳定性、可靠性要... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
