Fogging Tester
Standards
- DIN 75201: Automotive trim material fogging resistance.
- ISO 6452: Coated fabrics fogging behavior in vehicle interiors.
- SAE J1756: Automotive interior material fogging test protocol.
- BS EN 14288 & QB/T 2728: Leather and textile fogging evaluation.
- PV 3920/3015: VDA-standard fog value determination for non-metallic materials.
- ES-X83231, NES M0161, GM 9305P: OEM-specific fogging requirements for automotive suppliers.
Product Advantages
- Triple Testing Modes: Supports gloss, gravimetric, and haze analysis for comprehensive material evaluation.
- Precision Temperature Control: ±0.1°C accuracy across high/low baths (room temperature to 150°C) ensures repeatable results.
- Six-Station Efficiency: Simultaneous testing of six samples accelerates R&D and QC workflows.
- Corrosion-Resistant Design: 316 stainless steel test chambers and epoxy-coated steel frame withstand harsh chemical environments.
- Advanced Safety: Magnetic safety switch, over-temperature thermostat, and audible test-completion alerts.
- Data Connectivity: USB port and multi-function sensors enable seamless integration with lab information systems.
Product Features
- Dual-Bath System:
- High-Temperature Bath: 670×490×540mm, 3kW heating power (up to 150°C).
- Low-Temperature Bath: 400×220×520mm, 500W cooling capacity (0–100°C).
- Automated Controls:
- Digital thermoregulator with microprocessor for precise temperature programming.
- Programmable timer (1–9999 min) with auto-stop and end-test buzzer.
- Modular Accessories:
- 18/8 stainless steel test cups, flat beakers, and chrome steel rings for sample mounting.
- Six interchangeable cooling plates and haze/gloss measurement kits.
- Safety Compliance:
- CE-certified with anti-acid epoxy coating, emergency stop, and overpressure relief.
在线联系供应商
Other supplier products
 |
Bubble Leak meter | Main Uses Medical Device Packaging Inspection:The Gross Leak Tester can be used for the sealing performance testing of various medical device pack... |
 |
Plastic Pipe Hydrostatic Pressure Burst Tester | Standard ISO 1167: For thermoplastics pipe systems under constant internal pressure. ASTM D 1598: Standard test method for time-to-failure of pla... |
 |
Strength Tester for Lead - end of Photovoltaic Modules | Standard IEC 61215-2:2016: Terrestrial Photovoltaic (PV) Modules – Test Requirements for Electrical and Mechanical Components CE Certificat... |
 |
Paper and cardboard crease stiffness meter | Product Introduction: ZY-TDY300 microcomputer bending stiffness tester is used to measure the bending stiffness of paper and cardboard materials w... |
 |
Wet Microbial Penetration meter | The wet microbial penetration tester is mainly used to evaluate the barrier ability of medical protective equipment (such as surgical gowns, isolat... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | 卖方: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM卡测试仪用于检测SIM卡电路，支持iPhone 14/15/16/17 Pro Max和安卓手机的双SIM卡检测。配备LED数字显示屏，支持Type-C充电，即插... |
 |
HCV1500高精度电压传感器 | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500高精度电压传感器是一种能够在原边和副边完全隔离的条件下测量直流、交流、脉冲及各种不规则波形的电压传感器。它主要用于对精度要求较高的测量验证和校准领域，以及对灵敏度、稳定性、可靠性要... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
