Leather flexural tester
Standards
- EN ISO 20344:6.6: Safety footwear leather flexing resistance.
- I.U.P.10+20/I.U.P.20: International Union of Leather Technologists protocols for crease crack analysis.
- UNI 4818: Italian standard for leather flex endurance.
- DIN 53.351: German industrial standard for material bending fatigue.
- UNE/I.U.P.20: Spanish national standard for protective footwear upper testing.
Product Advantages
- Multi-Station Efficiency: 12-station configuration enables parallel testing of leather samples, reducing batch evaluation time by up to 75%.
- Automated Operation: Pre-programmed cycle counter with auto-stop function eliminates continuous monitoring, enhancing lab productivity.
- Temperature Control: Optional low-temperature variants (-20°C to ambient) simulate extreme climatic conditions for protective footwear testing.
- Ergonomic Design: Bench-mounted unit with tool-free sample clamping and intuitive control panel for rapid setup.
- Global Compliance: Meets critical standards for automotive interiors, safety footwear, and luxury leather goods.
- Surface Finish Analysis: Detects micro-cracks and coating delamination in creased areas, critical for assessing wear in dress shoes and bags.
Product Features
- Flexing Mechanism: Rotary bending arm applies 180° reciprocal motion to leather samples at 100 ±5 cycles/min.
- Sample Mounting: 12 independent clamps with adjustable tension screws accommodate leather strips (70×45 mm) and finished footwear uppers.
- Digital Control System:
- Programmable cycles (1–999,999) with pause/resume functionality.
- Real-time cycle counter and failure alerts (e.g., stitch breakage, coating cracks).
- Temperature Regulation:
- Ambient to -20°C operation (low-temp models) with digital thermostat.
- Insulated chamber minimizes condensation during cold testing.
- Safety Features: Emergency stop button, over-cycle protection, and non-slip bench mount.
在线联系供应商
Other supplier products
 |
Carton drop tester | Product introduction It is mainly used to simulate the impact of the drop impact on the packaging during transportation and loading and unloa... |
 |
Micro Controll Four-ball Friction Tester | Applicable Standards： When conducting tests, the microcomputer - controlled four - ball friction testing machine needs to comply with the followin... |
 |
Floor Caster Wear Tester | Meet the standard: GB/T 11982.2. GB/T 4085. BS/EN 425. ISO 4918-2009 ASTM D6962 BS EN 425-2002 BS EN 985-2001 ISO 10581-2011 ANSI-NALFA-LF... |
 |
Rapid screening Calorimeter | Product Introduction： The rapid - screening calorimeter is a professional calorimetric instrument for the quick assessment of reaction thermal haz... |
 |
Coatings Shear tester | Standard YY/T 0856-2011 (China): Specifies mechanical testing protocols for metal angular fixators, including single-compression bending and bendi... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | 卖方: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM卡测试仪用于检测SIM卡电路，支持iPhone 14/15/16/17 Pro Max和安卓手机的双SIM卡检测。配备LED数字显示屏，支持Type-C充电，即插... |
 |
HCV1500高精度电压传感器 | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500高精度电压传感器是一种能够在原边和副边完全隔离的条件下测量直流、交流、脉冲及各种不规则波形的电压传感器。它主要用于对精度要求较高的测量验证和校准领域，以及对灵敏度、稳定性、可靠性要... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
