Dry Cleaning & Washing Cylinder
Introduction
The dry cleaning and washing cylinder consists of a stainless steel rotary test chamber and a multi-speed drive with a digital timer.
It is used to test the color fastness for the dry cleaning and chlorine water washing fabrics.
Application
Dry cleaning and washing cylinder is designed to determine the color fastness for the dry cleaning and chlorinated pool water, with the aim to prepare samples for flammability testing.
Standards
AATCC 162 Colorfastness to water: Chlorinated pool.
16CFR PART 1610Standard for the flammability of clothing textiles.
●Clean the dry cleaning cylinder
●prepare the hardness concentrates according to the relevant standards.
●51 ml of the hardness concentrate was diluted to 5100 ml with distilled or deionized water.
●If necessary, adjust the pH of the solution to 7.0 with sodium carbonate or acetic acid.
●5000 ml of the solution (made in the above 3) was charged into a dry-cleaning cylinder. The temperature was adjusted to 21 ° C.
●Put the color test sample with the standard test fiber into the cylinder, turn off the barrel, and roll for 60 minutes.
●Get out the sample and remove the excess solution.
| Items | Parameters |
| Dimension | 72L X 49W X 62H (cm) |
| Structure | Stainless steel |
| Surface treatment | Wiredrawing treatment |
| Transport weight | 80kg |
| Power supply | 220V 50HZ max.0.05A |
在线联系供应商
Other supplier products
 |
Helmet Strap Tensile Tester | Purpose Apply a certain initial load to the helmet strap system for a certain period of time. Then, let a weight of a certain mass fall from a cert... |
 |
Collection of needle rubber sleeve resilience tester | Product introduction The collection needle rubber sleeve resilience tester evaluates the force measured by the collection tube when it passes... |
 |
Wire Torsion Tester | Applicable standards: GB/T 239.1-2012 "Metal materials wire Part I unidirectional torsion test method" GB/T 239.2-2012 "Metal materials wire Part... |
 |
Battery impact tester | The test sample cell is placed on a flat surface with a 15.8±0.2mm（5/8 in） diameter rod placed in a cross position over the center of the ... |
 |
Helmets Designated Protection Areas Tester | Main Purposes 1. Used to mark test points and test lines on helmets. 2. Used for line - marking according to different test standards. 3. Used t... |
Same products
 |
Plasma Indicator Strips Tape | 卖方: Hopeway AMD | Plasma Indicator Strips Tape provides a convenient solution for monitoring plasma sterilization p... |
 |
Custom Stainless Components for OEM Applications | 卖方: Yongjia County Yaokang Technology Co., Ltd. | Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid... |
 |
Precision Design for Automatic Liquid Level Control | 卖方: Yongjia County Yaokang Technology Co., Ltd. | Our stainless steel float balls are designed for liquid level control applications in valves, tan... |
 |
"China manufacturer power supply VM-5H3 for power generation | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer power supply VM-5H3 for power generation Is to use the generator sets of prof... |
 |
Reliable Components for Water and Industrial Systems | 卖方: Yongjia County Yaokang Technology Co., Ltd. | The Stainless Steel Float Ball is designed for automatic liquid level control and fluid managem... |
