Air - tightness Testing Device for Automotive Connectors
The air - tightness testing device for automotive connectors uses the pressure principle to conduct non - destructive tightness tests on containers of various shapes, and can test products with air - tightness requirements in various industries (such as engine casings, oil pumps and automotive pipelines, valves, pipes, air pillows, outdoor electronic advertisements, water tanks, airbags, sealed workrooms, fire - fighting equipment, compressor pipelines, internal components of automobiles and motorcycles, battery casings, rubber hoses and connectors, etc.).
Main Functions:
1. Provide stable positive and negative pressures for testing the air - tightness of seals or connectors. 2. The positive pressure value is digitally displayed and can be automatically controlled, while the negative pressure is controlled by a negative pressure pump.
Main Parameters:
1. Pressure gauge (-0.1 - 0.5MPa), digital pressure gauge, connecting air pipe, switch, pressure regulating valve 2. Three sets of connectors, with the diameters of the connecting pipes being 3, 5, 7 (in appropriate units) or as specified 3. Test water tank: 400mm×200mm×200mm 4. Timer: Can be set within the range of 0 - 999.9S/M/H 5. Positive pressure test: It can be pressurized according to the specified pressure, or according to the set program, such as pressurization at a level of 9.8KPa 6. Negative pressure test: Negative pressure of - 49Kpa (equipped with one negative pressure source with a maximum of - 89KPa) 7. Air source for positive pressure test: One silent compressor
在线联系供应商
Other supplier products
 |
Light transmittance fog meter | Applicable standards: GBT 2410-2008: Determination of light transmittance and fog degree of transparent plastics. This is the national standard of... |
 |
Single Burning Item | Introduction Single burning instrument (SBI) was measured supplies (excluding floorings) performance at a single burning heat invasion conditions.... |
 |
Self-tapping Performance Tester for Metal Bone Screws | Standard ISO 6475: Implants for surgery – Wear of total hip-joint prostheses ASTM F543: Standard Specification and Test Methods for Metalli... |
 |
Flooring VOC Emission Testing Chamber | Standard ISO 16000-9 (Indoor Air - Determination of Volatile Organic Compounds) ASTM D5116 (Standard Guide for Small-Scale Environmental Chamber De... |
 |
Protective Clothing Synthetic Blood Penetration Tester | Standard GB 19082-2003《Medical disposable protective clothing technology requires synthetic blood penetration test method》; ASTM F1670 / F1670M -... |
Same products
 |
Optical Brightener OB-1 (OBA 393) | 卖方: Jinan Ogilvy Chemical Co., Ltd | Chemical Name: 2-[(Ethylsulfanyl)methyl]phenyl methylcarbamateC.I.: 393CAS: 1533-45-5Molucular Fo... |
 |
PH-A63防水笔式PH/EC/温度三合一测试仪 | 卖方: 科立龙电子股份有限公司 | 特点 基于微处理器的快速准确显示-新的坚固耐用的人体工程学设计-外观时尚,携带方便 大屏幕背光，清晰显示，同时显示温度带自动温度补偿 主机防水等级IP65 电池电量缺电指示 自动关机；使用... |
|
|
PH-A6防水笔式高精度酸碱度/ 温度计 | 卖方: 科立龙电子股份有限公司 | 特点 基于微处理器的快速准确显示-新的坚固耐用的人体工程学设计-外观时尚,携带方便 大屏幕背光，清晰显示，同时显示温度带自动温度补偿 主机防水等级IP65 电池电量缺电指示 自动关机；使用... |
|
|
PH-A8防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 大屏幕背光，清晰显示，同时显示温度带自动温度补偿 主机防水等级IP65 两点按键校准,自动识别pH标准缓冲液；自动电源关闭，有效节省电池能耗。 两节七号大容量供电。适用于土壤、面团等。 ... |
 |
TH021W 物联网温湿度控制器 | 卖方: 科立龙电子股份有限公司 | 产品说明： 本电子温控器可用于仓储、宠物、养殖、栽培等各种温湿度控制场合，比如给温室、冬季花园加温或降温，以及水族馆水温监控、育种土壤的温控。操作简便，可与任何电热垫或其它加热或冷却设备连... |
