Car seat components strength test bench
Applicable standards:
The National Standard of the People's Republic of China （GB） : such asGB 15083, this standard specifies the strength requirements and test methods of the car seat system, which is applicable to the seats and their fixtures of M and N cars.
Federal Motor Vehicle Safety Standard （FMVSS） : such asFMVSS 207, this standard specifies the strength requirements of the seat back and its adjustment device and applies to all seats in Class M1 vehicles.
Economic Commission for Europe Regulation （ECE R） : such asECE R17, this regulation regulates the strength of car seats, seat belt anchors, etc.
Main parameters:
Loading capacity:The test bench should have sufficient loading capacity to simulate the various loads that the seat may withstand in actual use. For example, for a 20g static loading test, the test bench needs to be able to apply a force equivalent to 20 times the gravity of the seat assembly.
Loading method:The test bench should support a variety of loading methods, such as horizontal forward, horizontal backward, torsion, etc., to meet the needs of different test projects.
Test accuracy:The loading accuracy and measurement accuracy of the test bench should meet the requirements of the relevant standards to ensure the accuracy and reliability of the test results.
Number of tests:The test bench should have the function of setting and recording the number of tests for durability testing.
Control mode:The test bench is usually controlled by computer servo to achieve accurate loading and measurement.
Data acquisition and processing:The test bench should be equipped with a data acquisition system, which can automatically record various data during the test process and generate test reports.
在线联系供应商
Other supplier products
 |
Strip evenness tester | Product Introduction: Cotton yarn fiber strip analyzer is a high performance, high test efficiency of textile laboratory instrument, it is used to... |
 |
Electrical bushing flame retardant tester | Product Introduction: The flame retardant test instrument for electrical bushing is used to measure the flame retardant performance of PVC cold fo... |
 |
Microscale Continuously Closed Cup Flash Point Analyzer | Reference Standards： SH/T 0768, SN/T 3077.1, DL/T 1354, ASTM D6450 SN/T 3077.2, ASTM D7094 GB/T 261, GB/T 21615, ASTM D93 GB/T 5208, GB/T 21790, A... |
 |
Automatic Reaction Calorimeter | Standards GB 51283 GB/T 22232 GB/T 17802 SN/T 3078.1 Product Features 1. It offers three calorimetry methods: heat - flow, power - compensati... |
 |
Vibration Table meter | Standard ASTM D999: Vibration testing of shipping containers and packaged products. TAPPI T819: Corrugated box performance under simulated tran... |
Same products
 |
PHS‑25C Benchtop Digital pH Meter | 卖方: 科立龙电子股份有限公司ctron Co.Ltd | Product Description: Equipped with BNC‑composite electrodes and power supplies adapt... |
 |
PHS‑3C Automatic Calibration pH/Thermometer | 卖方: 科立龙电子股份有限公司ctron Co.Ltd | Product Description: Equipped with BNC‑compatible combination electrodes and power s... |
 |
KL‑016 Benchtop Digital pH Meter (Backlit Display) | 卖方: 科立龙电子股份有限公司ctron Co.Ltd | Product Description: This instrument features a large‑screen digital display, extern... |
 |
KL‑98 Professional Laboratory pH/ORP/Temperature Meter | 卖方: 科立龙电子股份有限公司ctron Co.Ltd | Product Description: The PH‑98 Tester is an easy‑to‑operate, multi‑functional microp... |
 |
KL‑03(I) Pen‑type High‑precision pH Meter | 卖方: 科立龙电子股份有限公司ctron Co.Ltd | Product Description: This instrument is available in a variety of colors. Calibratio... |
