.

AATCC KMS-M6 Washer, KMS-M6D Dryer

I. Product Overview

TheAATCC KMS-M6 Washer & KMS-M6D Dryerare precision textile testing instruments designed to evaluate fabric durability, colorfastness, and dimensional stability under controlled washing and drying conditions. These machines comply with AATCC Standard Test Method M6, simulating industrial laundering processes to assess textile performance in real-world applications.

  • Type: Stackable washer-dryer system for textile testing
  • Key Metrics:
    • Colorfastness (ΔE CIELAB)
    • Shrinkage Rate (%)
    • Fiber Breakage Count
  • Capacity: 5–10kg per cycle (adjustable load)
  • Applications: Garment manufacturing, textile R&D, quality control

II. Technical Specifications

ParameterKMS-M6 WasherKMS-M6D Dryer
Temperature Range 20°C–95°C (±1°C) 30°C–80°C (±1°C)
Cycle Types Delicate, Normal, Heavy Duty (AATCC M6) Tumble Dry, Air Fluff (AATCC 133)
Water Consumption 15L/cycle Not applicable (dry cycle)
Spin Speed 800–1200 RPM 800 RPM (low-speed tumbling)
Power Supply 220V/50Hz, 1.5kW 220V/50Hz, 1.2kW
Dimensions 600×600×1100mm 600×600×1000mm

III. Key Features

  • Integrated Testing System:
    • KMS-M6 Washer:Simulates industrial wash cycles with programmable detergent injection
    • KMS-M6D Dryer:Features airflow adjustment for colorfastness evaluation
  • Advanced Controls:
    • 7-inch touchscreen interface
    • 100 pre-programmed AATCC/ISO test cycles
    • Real-time vibration monitoring
  • Compliance:
    • AATCC M6 (Colorfastness to laundering)
    • ISO 105-C06 (Textile colorfastness)
    • ASTM D4685 (Washer-dryer testing)

IV. Applications

  1. Quality Control:Batch testing of dyed fabrics for commercial use
  2. R&D:Developing wrinkle-resistant and color-retaining textiles
  3. Education:Training on textile care labeling compliance
  4. Forensic Analysis:Evaluating garment damage from improper laundering

Standard Operation Workflow:

  1. Sample Preparation: Cut 100×100mm specimens
  2. Washer Setup: Select cycle (e.g., AATCC M6-2013)
  3. Dryer Setup: Adjust airflow and temperature
  4. Cycling: Run 5–10 consecutive wash/dry cycles
  5. Analysis: Measure color change via spectrophotometer

Safety Precautions:

  • Load balance required (±50g tolerance)
  • Avoid overloading detergent compartment
  • Use heat-resistant gloves during operation

* AATCC-certified test protocols * Water-efficient closed-loop system * Vibration-dampening frame * Includes 5-year calibration service * Stackable design saves lab space​**Technical Highlights**​- ±0.5 ΔE color accuracy (NIST-traceable) - 100% cotton-to-synthetic compatibility - Auto-detect load size and adjust water levels - WiFi data export to cloud platforms - Energy-saving eco-mode (30% power reduction)


在线联系供应商

至: 上海千实精密仪器
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Thermal Insulation Rock Wool Thermal Load Tester
Thermal Insulation Rock Wool Thermal Load Tester Introduction: This equipment determines the temperature at which rock wool insulation shrinks under a specified load when heated at a controlled r...
Dry Sand Rubber Wheel Wear Tester
Dry Sand Rubber Wheel Wear Tester Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi...
Total Knee Joint Prostheses Wear Test machine
Total Knee Joint Prostheses Wear Test machine Standard ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, including axial loading, flexion/extension kinematics, and...
Rubber non-rotor vulcanization Tester
Rubber non-rotor vulcanization Tester Product Introduction: Non-rotor vulcanizer is a rubber processing industry control rubber material quality, rapid inspection and rubber basic rese...
Electrochemical Corrosion and Wear Testing Machine
Electrochemical Corrosion and Wear Testing Machine Standard ASTM G119: A standard for evaluating synergistic corrosion-wear performance, particularly for biomedical implants in simulated body fluid...
供应产品

Same products

PHS‑25C Benchtop Digital pH Meter
PHS‑25C Benchtop Digital pH Meter 卖方: 科立龙电子股份有限公司ctron Co.Ltd Product Description: Equipped with BNC‑composite electrodes and power supplies adapt...
PHS‑3C Automatic Calibration pH/Thermometer
PHS‑3C Automatic Calibration pH/Thermometer 卖方: 科立龙电子股份有限公司ctron Co.Ltd Product Description: Equipped with BNC‑compatible combination electrodes and power s...
KL‑016 Benchtop Digital pH Meter (Backlit Display)
KL‑016 Benchtop Digital pH Meter (Backlit Display) 卖方: 科立龙电子股份有限公司ctron Co.Ltd Product Description: This instrument features a large‑screen digital display, extern...
KL‑98 Professional Laboratory pH/ORP/Temperature Meter
KL‑98 Professional Laboratory pH/ORP/Temperature Meter 卖方: 科立龙电子股份有限公司ctron Co.Ltd Product Description: The PH‑98 Tester is an easy‑to‑operate, multi‑functional microp...
KL‑03(I) Pen‑type High‑precision pH Meter
KL‑03(I) Pen‑type High‑precision pH Meter 卖方: 科立龙电子股份有限公司ctron Co.Ltd Product Description: This instrument is available in a variety of colors. Calibratio...