Digital Fabric Elmendorf Tearing Strength Tester
Tearing Tester Further Details: The Tearing Strength of fabrics, Paper, Plastic Film, or other comparable materials in sheet structure is controlled by estimation of work done in tearing through a settled length of the test example utilizing the elemendorf tear analyzer. The Elmendorf Tear Tester comprises of a metal part pendulum turned on hostile to contact metal spheres more than a vertical section altered on an unbending metallic base. The test example, fit as a fiddle fitted in between two clips is mounted on a pendulum and the other is mounted on the vertical section. The clasps are mounted in a way to give a holding look are adjusted to one another when pendulum is discharged by lifting a discharge lever the activity cause the pendulum to tumble down under its weight & to tear the test example at the same time. The vitality retained amid tearing is demonstrated on a scale fitted on pendulum by a low rubbing pointer turned on the hub of the pendulum. A movable blade is additionally mounted on the pendulum upper section is focused between the two braces & is utilized for making the starting opening in the test example. A check weight is supplied with the analyzer for confirmation of the scale.A fine metallic paint is smeared over it, in addition to it an excellent chrome plating to give it an corrosion safe completion. Cardboard Tearing Strength Tester Specifications: A. Microprocessor control; B. According to materials of different thickness, such as fabric, plastic, cardboard, etc., using pendulums with different weight; C. Equipped with safety bolt, pendulums installed tools and safety protection device for safety. D. Optional various measurement units: MN, CN, N, G, KG, OZ, LB; E. The cutting blade with hardening coating, more sharp and durable; F. Unique calibration system, guarantee the accuracy of the test for the most. Electronic Tearing Strength Tester Standards： GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734 GB/T455 QB/T 1050 JIS P8116 TAPPI T414
Other supplier products
|
|
Metal Wire Bending Fatigue Tester |
Main uses:
Metal wire repeated bending tester used for repeated bending test of wire, for different specifications of wire bending radius can be r... |
|
|
Fire stability tester paper gypsum board |
Introduction:
The Fire Stability Tester for Paper Gypsum Board is an essential instrument designed to evaluate the fire-resistant properties of gy... |
|
|
Cell thickness gauge |
Standard
ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems
ISO 3611: Calibration of Measuring Instrument... |
|
|
Cable extrusion tester |
Product Introduction: The cable extrusion testing machine is suitable for the "GB/T 33594 electric vehicle charging cable" extrusion test, which au... |
|
|
Wet leakage current test system of photovoltaic module |
Standard
IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
UL 61730: Safety Standard for Photovol... |
供应产品
Same products
