.

Yarn Twist Tester

Yarn Twist Tester
  • Yarn Twist Tester
供应商: 上海千实精密仪器

供应产品
在线联系供应商

TheSkein Length Testeris used to accurately measure the length of the yarn, for the determination of the yarn density or count of the yarn and the yarn strength test.


Standards
GB/T 4743 Textiles－Yarn from packages－Determination of linear density (mass per unit length) by the skein method
GB/T 14343 Testing method for linear density of synthetic filament yarns
GB/T 6838 Testing method for sewing threads
ISO 2060 Textiles-Yarn from packages-Determination of linear density (mass per unit length)-Skein method
ASTM D1907 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method

Features
OEM modeling
True single-chip microcomputer control, digital circuit, start and stop smoothly. You can design parameters. Besides, it is real-time speed, and the whole machine is no contact relay
It can be set to stop the first 1 ~ 5 laps in advance to slow down to greatly avoid the phenomenon of punching, mature and reliable electrical circuit: start and stop smooth, low noise operation, accurate circle, no ring phenomenon, good reliability, low failure rate
And the microcontroller set as one of the electronic counter.
With real-time speed function
Continuous step-less speed regulation

Structure principle:
1, the real single-chip domination, mature and reliable electrical circuits: start and stop smoothly, low noise, accurate loop-counting, no loop-clashing phenomenon, Good reliability low failure rate.
2, SCM design as one of the electronic counter
3, with the real-time speed measurement function
4, continuous variable speed
5, can set the final stop early deceleration, smoothly stop rotating , greatly avoiding the phenomenon of loop-clash
6, the sensor dynamic measurement, LED display
Main Specifications:
1, can be swirled only count: 1 ~ 6 tube
2, yarn frame circumference: 1000mm ± 1mm
3, yarn frame speed: 30r / min ~ 260r / min (Promise speed)
4, yarn frame laps set range: 2 ~ 9999 circle
5, swinging traverse reciprocating stroke: 35mm ± 0.5mm
6, a single yarn tension range: 0cN ~ 100cN
7, Tension test method: dynamic sensor measurement, digital display
8, 1 to 5 laps ahead of time to stop the slow setting, stop rotating smoothly, no skidding, punching phenomenon
9, SCM design as one of the electronic counter
10, all LCD display, no wear and tear
11, motor power: 60W
12, the power supply voltage: AC220V, 50HZ
13, Dimensions: 780mm × 660mm × 480mm
14, equipment weight: about 45Kg
Features Function:
1, design of the overall structure is firm , and adopt the stainless steel and aluminum alloy material, long life and good stability.
2, with the need to install pre-tension device to improve the accuracy of unit testing .
3, with the pre-set fixed length winding wire counter, easy to use.
4, can be equipped with pressure dust cover, to prevent dust and protect the operation to avoid the scruples of clip injuries.
5, equipped with emergency safety switch.


Technical Parameters

Items Parameters
Frame perimeter G171C：1000mm± 1mm
G171E：54in± 1/16in(export only)
Single yarn tension range 0~100cN/Single yarn
Shake yarn traverse reciprocating width 35mm
Test tube can be tested at the same time 6
Dimensions 780×660×480mm(L×W×H)

在线联系供应商

至: 上海千实精密仪器
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Total Hip Joint Prostheses Wear Tester
 Total Hip Joint Prostheses Wear Tester Standard YY/T 0651.1-2016 (China): Specifies wear testing parameters for total hip prostheses, including angular motion, loading modes, and enviro...
Safety hat electrical insulation performance tester
 Safety hat electrical insulation performance tester Product Introduction: Safety hat electrical insulation performance tester used to test the electrical insulation performance of safety hat, high d...
Sharp Edge Detection/Testing Apparatus (for Sharp edge tester)
 Sharp Edge Detection/Testing Apparatus (for Sharp edge tester) Standards : ASTM F963 4.8. EN71-1998 8.14. GB6675-2003 A.5.9. 16CFR 1500.48 Basic Configuration： Sharp Edge Tester: 1 unit Foot switch: 1 set ...
Fabric textile 45 degree flammability tester
 Fabric textile 45 degree flammability tester Applications: 45 degree flammability testeris designed to determine the burning characteristics of textiles. Stainless steel test cabinet with gla...
Fiber Crimp Elasticity Tester
 Fiber Crimp Elasticity Tester Product Introduction: YG362C fiber crimp elasticity meter is used for crimp degree of 1-22dtex fiber. Crimp elasticity, crimp recovery rate index...
供应产品

Same products

Reliable Components for Water and Industrial Systems
 Reliable Components for Water and Industrial Systems 卖方: 866507 The Stainless Steel Float Ball is designed for automatic liquid level control and fluid managem...
Double Convex Lenses
 Double Convex Lenses 卖方: Shandong Yanggu Constant Crystal Optics, Inc Double Convex Lensesare used in image relay applications, or for imaging objects at close conjuga...
Wedge Prism
 Wedge Prism 卖方: Shandong Yanggu Constant Crystal Optics, Inc Wedge prismis an optical element with plane-inclined surfaces, usually the faces are inclined tow...
Ball Lenses
 Ball Lenses 卖方: Shandong Yanggu Constant Crystal Optics, Inc Ball Lensesare commonly used to improve signal quality in fiber coupling applications, or for use...
KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery
 KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery 卖方: Xin Tang Shallow Power Supply Co.,LTD KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery Small Office & Retail UPS Backup Power Systems...