Geosynthetic Transmissivity Tester
Scope of application:
It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the specified pressure. During the test, seepage was carried out under the condition that the lateral pressure of the sample was 350kPa and the hydraulic gradient i=0.5, and the water seepage of the sample in a certain period of time was measured.
Meet the standard:
JTG E50 T1143-2006,SL/T,JT/T 521- Appendix A-2004,JTS-206-1- Appendix B B.3-2009
JTS/T245-2023.etc.
Instrument features:
Customized pressure gauge with imported high precision diffused silicon pressure sensor and 16-bit high resolution A/D converter;
High energy lithium sub-battery is used to power the pressure gauge, and the continuous use time is more than 1.5 years;
Pressure gauge can be adjusted to zero with one click, suitable for a variety of environments;
"kPa, MPa, Psi, mmHg, Bar, Kgf/cm2" six units can be switched;
The open-type hatch door structure is convenient for sample loading.
The body adopts the casting aluminum integrated molding process to ensure the sealing of the pressure chamber;
The specially designed sample holding device prevents the deformation of the plastic core plate of the drainage plate, combined with the sealing design, to ensure that the sample holding is air-tight and water-tight;
The hydraulic gradient can be adjusted by the height of the water tower.
Reasonable design of waterway pipeline reduces the loss of water head in the test, and the result is more accurate;
Pneumatic control element to control the inlet and outlet of compressed air and the size of pressure, to provide side pressure for the test;
Pressure chamber and seal plate can be customized according to customer requirements to meet different sizes of samples.
Technical parameters:
Test chamber structure is open
The effective length of the sample is 400mm
Sample width 100mm can be customized
Side pressure 350+20kPa(gauge accuracy 0.4%FS)
Head difference adjustment range 0——400mm
Accuracy 0.4%
Dimensions Host :715x300x260mm Water tower :440x440x860mm
Weight 35kg
在线联系供应商
Other supplier products
| AC/DC Current - Carrying Temperature - Rise and Voltage - Drop Test System for Automotive Wires | Application Scope of the AC/DC Current - Carrying Temperature - Rise and Voltage - Drop Test System for Automotive Wires: 1. Record the temperatur... | |
| Battery Electrode Resistance Tester | Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materials ISO 18516: Conductive Coatings – Measurement of ... | |
| Mask Bacterial Filtration Efficiency Tester | Medical Masks bacterial filtration efficiency tester also called BFE test machine is to determine the bacterial filtration efficiency (BFE) of medi... | |
| Tibial Tray Fatigue meter | YY/T 0810 (China): Specifies fatigue testing protocols for tibial trays in total knee arthroplasty, focusing on support and protection of plastic b... | |
| Rubber low temperature brittleness testing machine | Product Introduction: Plastic low temperature embrittlement testing machine is to determine the temperature of rubber and plastic when the sample i... |
Same products
| Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... | |
| WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | 卖方: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM卡测试仪用于检测SIM卡电路,支持iPhone 14/15/16/17 Pro Max和安卓手机的双SIM卡检测。配备LED数字显示屏,支持Type-C充电,即插... | |
| HCV1500高精度电压传感器 | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500高精度电压传感器是一种能够在原边和副边完全隔离的条件下测量直流、交流、脉冲及各种不规则波形的电压传感器。它主要用于对精度要求较高的测量验证和校准领域,以及对灵敏度、稳定性、可靠性要... | |
| Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... | |
| Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
















