Insulator Mounting Studs
1.Technical Parameters and DrawingsHE CodeIMS-1HE CodeIMS-2HE CodeIMS-31. Tolerance: ±5% 2. All dimensions are in MM3. Material: carbon steel 4. Finish: hot dip galvanized 5. Customized sizes are available at request.2.Product Description:Insulator mounting studs, or line post insulator pins are produced to attach insulators to cross arms.Wood crossarm long studs are furnished with one square nut, one MF locknut, one flat square washer, and one split lock washer, and a wrench shoulder below the serrated collar.Steel crossarm studs are furnished with one hex nut and two spring lock washers.The serrated collar and lock washers provide tight connection.Material is steel hot dipped galvanized to ASTM A 153The above are typical only, please consult Shanghai Herrajes for further information.3.Product Details:Name: line post insulator pins,insulator mounting studs, lines post studs, line post insulator studs, stud bolts insulator screwsHS code: 7318159090Model: ANSI/ASMEPackage: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: carbon steelFinish: HDGODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000 Minimum tensile strength lbs.: Stud dia. mm: 16, 20,etc.
Other supplier products
|
|
|
1.Technical Parameters and DrawingsHE CodeDimensions(mm)Designated size of couplingRated failure loadWt.ABCDΦR(KN)(kg)QH-75710033.3171616700.6QH-10... |
|
|
|
1.Technical Parameters and DrawingsHE CodeCBA2337Notes:1. Tolerance: ±5% 2. All dimensions are in mm.3. Material: carbon steel 4. Finish: hot dip g... |
|
|
|
1.Technical Parameters and DrawingsHE CodeDescriptionWt.kgGH11/16Guy hook0.35Notes:1. Tolerance: ±5% 2. All dimensions are in Inch except for mark... |
|
|
|
1.Technical Parameters and DrawingsHE CodeDimensionsWt./1000ALCRkgCSC-179.541.95CSC-27.811.852.35CSC-38.612.85.52.66CSC-410156.52.68CSC-513.5198.5... |
|
|
|
1.Technical Parameters and DrawingsHE CodeDescriptionBHS-1short shank ball hookHE CodeDescriptionBHL-1long shank ball hookNotes:1. Tolerance: ±5% ... |
供应产品
Same products
