Crossarm Corner Pins
1.Technical Parameters and DrawingsHE CodeCCP-011. Tolerance: ±5% 2. All dimensions are in MM3. Material: carbon steel 4. Finish: hot dip galvanized 5. Customized sizes are available at request.2.Product Description:Crossarm corner pins are produced to mount insulators at an angle.Bolts are used to attach corner pins to cross arms. Pins are are made of ductile iron, hot-dip galvanized to ASTM A153.T he above are typical only, please consult Shanghai Herrajes for further information.3.Product Details:Name: crossarm corner pins, insulator corner pins, angle crossarm pins, crossarm corner type pinsHS code: 7326Model: ANSI/ASMEPackage: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: carbon steelFinish: HDGODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000 Minimum tensile strength lbs.: Lead thread in: 1Crossarm size in: 4×5Pin length above crossarm in: 5 Bolt in: 5/8×7
Other supplier products
|
|
|
1.Technical Parameters and DrawingsHE CodeDimensions(mm)Designated size of couplingRated failure loadWt.ABCDΦR(KN)(kg)QH-75710033.3171616700.6QH-10... |
|
|
|
1.Technical Parameters and DrawingsHE CodeDimensions(mm)Wt.Rated failure loadD1D2ALΦR1ΦR2(kg)(kN)YPL.43100YPL.66120YPL.8160YPL.9200YPLYPL.8200YPLYP... |
|
|
|
1.Technical Parameters and DrawingsHE CodeDescriptionWt.kgGH11/16Guy hook0.35Notes:1. Tolerance: ±5% 2. All dimensions are in Inch except for mark... |
|
|
|
2.Technical Parameters and DrawingsHE CodeDimensionsWt.Dia.Eye size.Length under eyeskgES3/83/8"7/8"×1 1/4"3"0.100ES1/21/2"1 1/4×1 5/8"6"0.295ES5/8... |
|
|
|
1.Technical Parameters and DrawingsHE CodeWire dia.Dimensions(mm)Wt.mmABCΦDERkgGC.06GC.20.14GC-106..15GC-129-11..22GC-1412..36GC.70.8GC.72.23Notes:... |
供应产品
Same products
