GR12 Titanium Wire (3Ti-0.3Mo-0.8Ni), high quality titanium wire, heat exchanger titanium wire,grade12 titanium straight wire, grade12 titanium coiled wire
Titanium Alloy Grade 12 has outstanding corrosion resistance and a combination of high strength and low density, with good ductility. Small additions of nickel and molybdenum have been made to this alloy resulting increase in corrosion resistance and high strength. It is particularly suitable for use in mildly reducing conditions, or where conditions vary from oxidising to reducing. It is particularly resistant to crevice corrosion in hot brines.Typical Applications of grade 12: Many of the applications of grade 12 titanium are in the chemical industries. The common uses in Australia are in chemical processing, where titanium grade 12 is used for reactor autoclaves, piping and fittings, valves, heat exchanges and condensers.Mechanical Properties GradeTensile strength, MPa (min)Yield strength, MPa (min)Elongation, %(min)Reduction of Area, %(min)GrChemical ComponentGradeTiMoNiN,maxC,maxH,maxFe,maxO, maxResidualsMax eachMax totalGr12Main0.2-0.40.6-0.90.030.080.0150.300.250.10.4As one of the professional gr12 titanium wire (ti-0.3mo-0.8ni), high quality titanium wire, heat exchanger titanium wire,grade12 titanium straight wire, grade12 titanium coiled wire manufacturers and suppliers in China, TC Titanium can offer you high quality and fast delivery products in stock. If you want to wholesale good quality gr12 titanium wire (ti-0.3mo-0.8ni), high quality titanium wire, heat exchanger titanium wire,grade12 titanium straight wire, grade12 titanium coiled wire enjoying hot sales around the world at low price, please feel free to contact our distributor or our factory.
Other supplier products
|
|
|
F5 is the most commonly used titanium alloy. It has high strength and also used in the aerospace or tough environment. Chemical composition Wt. %:... |
|
|
|
Titanium Grade 5 is an alloyed titanium product containing 6% Aluminum and 4% Vanadium, is the most commonly used of all titanium alloys, is a medi... |
|
|
|
F9 is sometimes referred to as half F5. It has better strengths than the commercially pure titanium, and is easier to form than the Ti 6AL4V . Che... |
|
|
|
F7 is added Pd in the material. It performs great to solve the crevice corrosion problem. But the cost is higher than other material. Chemical com... |
|
|
|
Titanium Grade 1 is an unalloyed, low strength titanium product containing low oxygen with high formability. Because of all these qualities, this g... |
供应产品
Same products
