Electric Contact Pressure Gauges
Electric contact gaugeare suggested where application is for control of pressure & for Audible or visible alarms.
Electrical contact pressure gauge gives electrical output which can be used to turn a motor on/off & similar applications. Single or double contacts are standard with triple contacts available on special request.
Make or break settings can be achieved in a variety of permutations with rising or falling pressure / temperatures.
What is Electrical Contact Pressure Gauges?
The pressure gauge with electrical contactis composed of a measuring system, an indicating system, a magnetic-assisted electric contact device, a casing, an adjustment device, and a junction box (plug seat). General electrical contact pressure gauges are used to measure the positive and negative pressures of gas and liquid media that are not corrosive to copper and copper alloys. Electrical contact pressure gauges are widely used in petroleum, chemical, metallurgy, power stations, machinery and other industrial sectors or mechanical and electrical equipment to measure the pressure of various fluid media without explosion hazard. Generally, the contact pressure gauge is used in conjunction with the corresponding electrical devices (such as relays and inverters, etc.) to automatically control and send signals (alarms) through the meter for various gas and liquid media whose pressure is measured (controlled).
CG Electric Contact Pressure GaugesAdvantages
The electrical contact signal pin of the electrical contact pressure gauge device is equipped with an adjustable permanent magnet, which can increase the suction force of the contact and accelerate the contact action, so that the contact is reliable, the arc can be eliminated, and it can effectively avoid the frequent shutdown of the contacts of the instrument due to the vibration of the working environment or the pressure pulsation of the medium. Therefore, the electric contact pressure gauges have the advantages of reliable action, long service life, and large contact switch power. The instrument also has the advantages of combined measurement and control, simple installation, and small maintenance.
How to Test Electric Contact Pressure Gauges
It is only an electric contact signal device added to the ordinary pressure gauge. Therefore, the verification of the pressure part is the same as that of the ordinary pressure gauge, except that the pressure part is qualified. Only after the pressure part has passed the verification, the verification of the electric contact signal device needs to be added.
Install the pressure gauge on the calibrator, use the needle selector to set the two signal contact pointers outside the upper and lower limits respectively, and then perform the value verification. After the indicating value verification is qualified, set the upper and lower signal contact pointers at three or more different verification points respectively, slowly increase or decrease the pressure until the signal is sent. Then the deviation between the reading of the standard pressure gauge and the indicated value of the signal pointer shall not exceed the absolute value of the allowable basic error.
Electric Contact Pressure Gauges Working Principle
The electric contact pressure gauge is based on the spring tube in the measuring system under the pressure of the measured medium, forcing the end of the spring tube to produce corresponding elastic deformation and displacement. This kind of electrical contact pressure gauge is driven by the gear transmission mechanism with the help of the pull rod and amplified. The indication (together with the contact) will indicate the measured value on the dial one by one. At the same time, when it is in touch with the contact (upper or lower limit) on the setting pointer (moving off or on), the circuit in the control system can be disconnected or connected to achieve automatic control and transmission, in order to achieve the purpose of automatic control and sending an alarm.
As an excellent pressure gauge supplier, we offer a wide range of digital pressure gaugefor you to choose from.
在线联系供应商
Other supplier products
 |
Electric Contact Pressure Gauges | Electric contact pressure gauges are suggested where application is for control of pressure & for Audible or visible alarms. Electric contac... |
 |
4 Inch Flush Diaphragm Seal Pressure Gauges | Flush diaphragm pressure gauge, is composed of all-stainless steel case gauge and diaphragm body. This kind of diaphragm pressure gauge is applicab... |
 |
4 Inch Pressure Gauge | Pressure gauge 1 4with stainless steel or steel or plastic case, there are many different type such as low pressure, diaphragm seals style, electri... |
 |
80mm Black Steel Case Set Pointer Differential Pressure Gauges | 80mm digital differential pressure meterwhich is ecnomic differential gauge widely used in many field . Specifications of 80mm Black Steel Case ... |
 |
Safety Pressure Gauge | Safety pattern gauges ensure an even higher protection for the operator in the event of a fatal rupture of the Bourdon tube. For this purpose they ... |
Same products
 |
SF6 Gas Density Monitor | 卖方: Lanso Instruments LLC. | As one of the professional gas pressure gauge manufacturers, Lanso is committed to offering SF6 m... |
 |
Pressure Transmitter | 卖方: Lanso Instruments LLC. | Lanso types of pressure transmitters feature compact structure and high accuracy, and can output ... |
 |
Pressure Measurement Gauge | 卖方: Lanso Instruments LLC. | Lanso, as a professional oil pressure gauge manufacturers& supplier, keeps on providing our c... |
 |
Lanso Pressure Measurement Instrument | 卖方: Lanso Instruments LLC. | Our current line of an instrument used to measure pressure features Gas Density Monitor Series, P... |
 |
Lanso Pressure Measurement Instrument | 卖方: Lanso Instruments LLC. | Our current line of an instrument used to measure pressure features Gas Density Monitor Series, P... |
