EST-FG2 Manual Force Measurement Test Stand
The test stand EST-FG2V/H is a electric motor test stand. It has a built-in DC motor, displacement measurement device, good load stability, wide application range; wide bench test speed, high accuracy; manual control, displacement cycle, and force value cycle functions. The manual test standcan be connected with a dynamometer to measure the force value and displacement, which is suitable for various industries such as push-pull load, plug-in force, fatigue test, and destruction test.
Features of EST-FG2 Manual Force Measurement Test Stand
Motorized driving.
Rugged construction
Capacity Up to 650 N (140 lbf,65kgf)
Multiple operation modes
Three-stage programmable cycle
Teaching & Playback programming
Force gauge data integration
USB connection to PC
Multiple limit protection functions
Specification of EST-FG2 Manual Force Measurement Test Stand
Capacity |
650N (65KG, 140lbf) |
Stroke |
220 mm |
Speed |
Adjustable Range: 30~720 mm/min Resolution:0.1 mm/min Accuracy: ±1 mm/min |
Displacement |
Resolution: 0.01 mm Accuracy: ± 0.2mm/min |
Operation Mode |
Manual, Cycle, Demo, Locating Mode |
Protection Functions |
Position Limit Force Limit (connected to force gauge) Locked rotor. Power Protection |
Cycle Program |
Three-stage cycle Displacement-based (D-cycle) Force-based(F-cycle) |
Outputs |
USB-B(connect to PC) RS232 outputs Set point output, RS232(connect with force gauge) |
Operating Environment |
0 to 40℃,20 to 80% RH |
Power Supply |
AC100~240V,1A |
Dimensions |
630 x 320 x 180 mm(EST-FG2V) 640 x 125 x 278 mm(EST-FG2H) |
Weight |
As one of the most reliable testing and measuring instruments companies, we provide digital height gauge, digital push pull force gauge, cap torque tester and etc. We also offer optimized solutions for special requirements.
在线联系供应商
Other supplier products
EST-TT1 Manual Torque Measurement Test Stand | EST-TT1 Manual Torque Measurement Test Stand Mikrometru Est-tt1 is a horizontal torque test stand, which is used for torque wrench test. It has ... | |
EHS Shore Durometer Hardness Tester Unit | EHS1A/5D is a high-precision digital shore hardness meter. This EHS digital shore durometer gauge adopts high-precision displacement sensor and spr... | |
EST-HS2 Manual Durometer Test Stand | EST-HS2 durometer test standis a test stand for durometer. The test stand is a workbench for loading Shore hardness tester testing. Using three-poi... | |
EFGE Digital Push Pull Force Gauge | With compact size, high accuracy, digital push pull force meteris easy to operate and handy to carry out. The digital push pull force gauge, also c... | |
EFGH Advanced Force Indicator | The EFG20H professional digital advanced force gaugeindicator is designed to work with a wide range of Mikrometry remote force and torque sensors. ... |
Same products
便携式露点仪 RTM2601 | 卖方: 青岛瑞迪仪器有限公司 | 便携式露点仪 RTM2601 1.产品概述: 本仪器是一款便携式露点仪。可以对环境温度、相对湿度、湿球温度、露点温度进行测量,可以快速响应工业范围内的温湿度测量,也能够胜任多种复杂环境中温湿度的... | |
GF3000 STATIONARY MULTI STATIONS POWWER METER TEST BED | 卖方: 782364 | The GF3000 series stationary three phase energy meter test bench is a fully automatic system that... | |
GF1000 MULTI-POSITIOS 1-PH ENERGY METER TEST BENCH | 卖方: 782364 | The GF1000 series multi-positions single phase kWh meter test bench can measure mechanical meters... | |
GF112D 1-PHASE ELECTRICITY METER TESTER | 卖方: 782364 | TheGF112D is a portable one-phase power meter tester. It used for testing the error of single-pha... | |
GF112B ONE-PHASE WATT-HOUR METER CALIBRATOR | 卖方: 782364 | GF112B single phase electricity meter calibrator is suitable to test various types single phase e... |