Electric Contact Pressure Gauges
Electric contact pressure gauges are suggested where application is for control of pressure & for Audible or visible alarms.
Electric contact gaugegive electrical output which can be used to turn a motor on/off & similar applications. Single or double contacts are standard with triple contacts available on special request.
Make or break settings can be achieved in a variety of permutations with rising or falling pressure / temperatures.
What is Electrical Contact Pressure Gauges?
The pressure gauge with electrical contactis composed of a measuring system, an indicating system, a magnetic-assisted electric contact device, a casing, an adjustment device, and a junction box (plug seat). General electrical contact pressure gauges are used to measure the positive and negative pressures of gas and liquid media that are not corrosive to copper and copper alloys. Electrical contact pressure gauges are widely used in petroleum, chemical, metallurgy, power stations, machinery and other industrial sectors or mechanical and electrical equipment to measure the pressure of various fluid media without explosion hazard. Generally, the contact pressure gaugeis used in conjunction with the corresponding electrical devices (such as relays and inverters, etc.) to automatically control and send signals (alarms) through the meter for various gas and liquid media whose pressure is measured (controlled).
CG Electric Contact Pressure GaugeAdvantages
The electrical contact signal pin of the electrical contact pressure gauge device is equipped with an adjustable permanent magnet, which can increase the suction force of the contact and accelerate the contact action, so that the contact is reliable, the arc can be eliminated, and it can effectively avoid the frequent shutdown of the contacts of the instrument due to the vibration of the working environment or the pressure pulsation of the medium. Therefore, the electric contact pressure gauge has the advantages of reliable action, long service life, and large contact switch power. The instrument also has the advantages of combined measurement and control, simple installation, and small maintenance.
How to Test Electric Contact Pressure Gauges
It is only an electric contact signal device added to the ordinary pressure gauge. Therefore, the verification of the pressure part is the same as that of the ordinary pressure gauge, except that the pressure part is qualified. Only after the pressure part has passed the verification, the verification of the electric contact signal device needs to be added.
Install the pressure gauge on the calibrator, use the needle selector to set the two signal contact pointers outside the upper and lower limits respectively, and then perform the value verification. After the indicating value verification is qualified, set the upper and lower signal contact pointers at three or more different verification points respectively, slowly increase or decrease the pressure until the signal is sent. Then the deviation between the reading of the standard pressure gauge and the indicated value of the signal pointer shall not exceed the absolute value of the allowable basic error.
Electric Contact Pressure Gauges Working Principle
The electric contact pressure gauge is based on the spring tube in the measuring system under the pressure of the measured medium, forcing the end of the spring tube to produce corresponding elastic deformation and displacement. This kind of contact pressure gauge is driven by the gear transmission mechanism with the help of the pull rod and amplified. The indication (together with the contact) will indicate the measured value on the dial one by one. At the same time, when it is in touch with the contact (upper or lower limit) on the setting pointer (moving off or on), the circuit in the control system can be disconnected or connected to achieve automatic control and transmission, in order to achieve the purpose of automatic control and sending an alarm.
GC , as an excellent pressure gauge factory, offers a wide range of pressure gauge for you to choose from.
在线联系供应商
Other supplier products
 |
Electric Contact Pressure Gauges | Electric Contact Pressure Gauges Electric contact pressure gaugesare suggested where application is for control of pressure & for Audible or v... |
 |
2 Inch Medical High Pressure 4000psi Chromed Thread Bottom Gauge | 2 inch high pressure 4000psi gauge chromed connection with back connector. Specifications of 2 Inch Medical High Pressure 4000psi Chromed Thread... |
 |
2 Inch DN10 Mining Pressure Gauges | 2 inch diameter DN10 is available for the mining gauge, which is universal for the mining equipement. Now the price of china digital pressure gaug... |
 |
All Plastic Diaphragm Seal Pressure Gauges | Diaphragm plastic pressure gauge, is composed of all-stainless steel case gauge and diaphragm body. It is applicable for oil refineries, chemical p... |
 |
1.5 Inch 4000psi Brass Internal Dry Pressure Gauge With Front Flange | As a professional pressure gauges supplierand pressure gauge manufacturerin China, GC gauge has many kinds of pressure gauges, which are general (o... |
Same products
 |
SF6 Gas Density Monitor | 卖方: Lanso Instruments LLC. | As one of the professional gas pressure gauge manufacturers, Lanso is committed to offering SF6 g... |
 |
Pressure Transmitter | 卖方: Lanso Instruments LLC. | Lanso types of different pressure transmitterfeature compact structure and high accuracy, and can... |
 |
Pressure Measurement Gauge | 卖方: Lanso Instruments LLC. | Lanso, as a professional pressure gauges supplier, keeps on providing our customers with differen... |
 |
Lanso Pressure Measurement Instrument | 卖方: Lanso Instruments LLC. | Our current line of an equipment used to measure pressurefeatures Gas Density Monitor Series, Pre... |
 |
Mechanical Pressure Gauge | 卖方: Lanso Instruments LLC. | Lanso is specialized in developing medium and high-end precision mechanical gauges for pressure m... |
