GD-265H-1 Automatic Kinematic Viscometer
I. Main technical features
1. This instrument adopts micro-computer as the central control component. It achieves prompt type operation.
2. This instrument can intelligently control the whole procedure of the test. It achieves the full automation of keeping temperature constant, time detection, viscosity calculation, viscometer tube cleaning and drying, and automatically print out test result.
3. This instrument has ability of fault identification and processing. It is convenient for user to analyze and judge the condition of instrument.
II. Main technical specifications
1. Viscometer tube: Ubbelohde viscometer (Dilution type); as per GB/T1632-93
2. Measurement accuracy: As per GB/T265, GB/T1632-93
3. Temperature controlling range: Room temperature~100 ℃
4. Temperature controlling accuracy: ±0.1℃
5. Timing accuracy: ±0.1 s
6. Maximum timing time: 999.9 s
7. Power supply: AC 220V±10%, 50 Hz
8. Maximum power consumption: 2000 W
9. Ambient temperature: 0℃~40℃
10. Relative humidity: 20~90% at 40 ℃
11. Barometric pressure: 96 kPa~103 kPa
12. Dimension: 800mm×530mm×610mm(circulating bath and vacuum suction apparatus are not included )
Note: The instrument is equipped with four pieces of Ubbelohde viscometer tubes in standard packing list. The inner diameters for each is 0.8mm,1.0mm,1.2mm and 1.5mm. If the user need other kinds of viscometer,pls inform us for customizing.
在线联系供应商
Other supplier products
GD-6536C Low-temperature Distillation Apparatus | SummaryThe instrument is designed and made as per standardsGB/T6536 Test Method for Distillation Characteristics of Petroleum ProductsandASTM D86 S... | |
GDJ-1F Brookfield Viscometer | Summary The instrument is designed and made as per national standards of People’s Republic of ChinaGB/T213-2008 Test Method for Calorific Val... | |
GDGS Power Transformers Dielectric Loss Analysis | 1PowerFactor Testerapplication GDGS automatic tangent delta tester is applied to measure the dielectric loss and capacitor value of insulation mate... | |
ASTM D445 Automatic Kinematic Viscosity Apparatus for Petroleum Products | Introduction: » GD-265H ASTM D445 Automatic Kinematic Viscosity Apparatusis designed and made as per the industry standard of People’... | |
GD-0610 Asphalt Rolling Thin Film Oven | Summary This instrument is designed and made as per industrial standardT 0610-2011 Standard Test Method for Effect of Heat and Air on a Moving Film... |
Same products
WF-EDU-02 Motor & Propeller Test Kit | 卖方: Wing Flying Technologies Co., Ltd | WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare... | |
WF-EDU-01 Motor and Propeller Test Kit | 卖方: Wing Flying Technologies Co., Ltd | WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ... | |
WF-EN-50 Engine Test Bench | 卖方: Wing Flying Technologies Co., Ltd | Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ... | |
WF-EN-15 Engine Test Bench | 卖方: Wing Flying Technologies Co., Ltd | WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ... | |
BS EN 12600 双轮胎冲击体 | 卖方: 秦皇岛源辰科技设备有限公司 | 参考标准: BS EN 12600:2002建筑用玻璃。摆锤试验。平板玻璃的冲击试验方法和分类 技术数据: 1)充气轮胎冲击器: 重量:50kg±0.1 kg 胎压:0.35Mp... |