GD-6536B Low-temperature Distillation Apparatus
Summary
This instrument is designed and made as per standardsGB/T6536 Test Method for Distillation Characteristics of Petroleum ProductsandASTM D86 Standard Test Method of Distillation for Petroleum Products at Atmospheric Pressure.It is suitable to determine the distillation characteristics of gasoline, aviation gasoline, jet fuels, solvent having special boiling point, naphtha, diesel oil, distillate fuels, and other petroleum products.
This instrument is a kind of double-units instrument which the minimum temperature of the condenser pipe can reach 0℃.It is an ideal distillation tester for petroleum products under low temperature condition.
I. Main technical features
1.The instrument adopts low temperature and double units working mode. The minimum temperature can set to 0℃.It can do test for one sample or two samples at same time.It highly improves the work efficiency.
2.It adopts digital temperature controller, stainless-steel heater, new type refrigeration compressor and electric stirrer to constitute constant temperature bath. The temperature in the bath is uniform,can fully meet the requirements of test.
3.It adopts special designed structure, cooling speed is fast.The bath temperature can cool down from room temperature to 0℃ within 50 minutes.
4.It adopts special heating furnace to ensure the safety of test. Heating power can be stepless adjusted to meet the requirements of test.
II. Main technical specifications
1.Power supply: AC(220±10%)V, 50Hz
2.Heating power: 1000W×2.
3.Receiving cylinder: 100ml, division value is 1ml.
4.Distillation flask: 125ml,meet the requirements of GB/T 6536 and ASTM D86
5.Thermometer:(-2~300)℃ and (-2~400)℃.Division value 1℃.
6.Flask support board: SiC, bore diameter is: φ32mm, φ38mm, φ50mm.
7.Temperature controller:1) Control range: 0℃～60℃
2) Accuracy: ±0.5℃
3) Temperature display: LED
Note: The temperature control is to control the temperature of condensate in the condenser pipe.
8.Ambient temperature: ≤30℃
9.Relative humidity: ≤85%
10.Cooling system: New type refrigeration compressor
11.Maximum power consumption: 4000W
12.Dimension:730mm×530mm×580mm
在线联系供应商
Other supplier products
 |
GD-0613A Automatic Fraass Breaking Point Tester | Summary This instrument is used to determine the temperature which a bitumen tends to break rather to flow when cooled and stressed as per standard... |
 |
GDGS Good Quality Tan Delta Test Set for Power Transformers | 1PowerFactor Testerapplication GDGS automatic tangent delta tester is applied to measure the dielectric loss and capacitor value of insulation mate... |
 |
GDJ-1F Brookfield Viscometer | I. Summary The instrument is designed and made as per T0625 “Asphalt Brookfield Rotational Viscosity Test (Brookfield Viscometer Method)&rdq... |
 |
GD-265B Kinematic Viscometer | Summary This instrument is designed and made as per the industrial standard of People’s Republic of ChinaSY/T5651 Technical Condition of Petr... |
 |
GD-265-3 Automatic Capillary Viscometer Washer | Introduction: »GD-265-3 Automatic Capillary Viscometer Washeris designed and made specially for washing the capillary viscometers, which are ... |
Same products
 |
WF-EDU-02 Motor & Propeller Test Kit | 卖方: Wing Flying Technologies Co., Ltd | WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare... |
 |
WF-EDU-01 Motor and Propeller Test Kit | 卖方: Wing Flying Technologies Co., Ltd | WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ... |
 |
WF-EN-50 Engine Test Bench | 卖方: Wing Flying Technologies Co., Ltd | Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ... |
 |
WF-EN-15 Engine Test Bench | 卖方: Wing Flying Technologies Co., Ltd | WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ... |
 |
BS EN 12600 双轮胎冲击体 | 卖方: 秦皇岛源辰科技设备有限公司 | 参考标准: BS EN 12600:2002建筑用玻璃。摆锤试验。平板玻璃的冲击试验方法和分类 技术数据: 1)充气轮胎冲击器: 重量:50kg±0.1 kg 胎压:0.35Mp... |
