.

Glass and alzing Products testing Machine

Impact Testing Equipment

Testing Machine for Mechanical Properties of Tempered Glass

Shot Bag

1)Weight:45kg±0.1kg 46kg±0.1kg

2)Height: 330mm± 13mm

3)Max diameter:250mm

4)Lead sand size: 2.5mm

Pneumatic Tyres Impactor

Pneumatic Tyres Device for Pendulum Test of Glass In Building According to BS EN 12600

Reference standard:

BS EN 12600:2002

Glass in building - Pendulum test - Impact test method and classification for flat glass

MS 1498:2017

Safety glass in building - Specification

Technical Parameters:

Weight 50 kg ± 0.1 kg

Tire pressure: 0.35Mpa ± 0.02Mpa

Type: 3.50-R8 4PR

Impact Frame

Test Frame:

Frame Size: 1900mm*1500mm*3570mm

Samples Size: 1930mm*864mm

Lift: Electric

Release: Auto

Maximum impact height: 1200mm (customized)

Rubber Pad Width: 15mm

Rubber Pad Thickness: 3mm

Rubber Pad Hardness: Shore A50

Drop Ball Impact Test Machine

Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object

Hardness steel ball:

a) 2260g ± 20g, diameter of approximately 82.5mm

b) 227g ± 2g, diameter of approximately 38 mm

c) 1040g ± 10g, diameter of approximately 63.5 mm

d) 508g±3g, diameter of approximately 50 mm

Frame Height: 1000mm, 5000mm, 12000mm, Customized

Automatic release and lift. Power: 220V 50Hz 580W

Supporting fixture:

a) Support Size: 350mm*350mmand 660mm*660mm (Customized)

b) Frame width 15mm

c) Steel box height 150mm

d) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50

e) Interposed sheet of rubber: thickness 3mm, hardness shore A50

Applied Test Pieces Size: 300mm*300mm 610mm* 610mm

Head-form Test Device

Head Weight: 10kg Head Size: 500mm*932mm Impact height: < 1.5m Samples size: 1100mm*500mm Felt hat: 90g/89mm/3mm Frame size: 1400mm*666mm*320mm

Safety Glass testing Equipment:

Portable on-site Comprehensive Measurement Instrument for Energy-saving Glass

It is applicable to the field test for opt thermal parameters of energy-saving glass installed and or to be installed

The data that the instrument can measure is: thermal parameters, optical parameters, light transmittance, light reflectance, shading coefficient, U value, LSG, Low-E position, E value, space thickness, overall thickness, glass thickness

The types of glass that the instrument can measure are:

Single pane, Laminated glass, Uncoated insulated glass, Coating on both sides and below, Coating on more than two sides, Coating on both sides and below, Coating on more than two sides, Vacuum glazing

Pummel Test Device:

Hammer head diameter: 30mm

Impact Distance: Adjustable

Shot Bag Impact Testing Frame:

Shot Bag 45kg/46kg

Automatic Release

Electric Lifting

Pneumatic Clamping

PV Load Test Equipment

Size: 6425mm*2000mm*3490mm

Samples: 1643mm*991mm~2009mm*1027mm (Customized)

Source: Sandbag

Load: 2400Pa 5400Pa 8100Pa 10000Pa (Customized)

Pneumatic Tyres Device

Weight 50 kg ± 0.1 kg

Tire pressure: 0.35Mpa ± 0.02Mpa

Type: 3.50-R8 4PR

Forced Entry Resistant Glass Test Device

Axe: 810mm Long

Axe Quality: 1.80kg

Sample size: 610mm*610mm

Insulating Glass Dew Point Meter

Operating temperature: -80°C ~ 100°C

Tube height: 300mm

Tube diameter: 50mm

Temperature resolution: 0.1 °C

Hard/Soft Pendulum Shock Test for Lifts

Hard pendulum shock device

Height: 330± 15mm

Max diameter: 240±10mm

Weight: 10kg ± 0.1kg

Material: according to ISO standard

Filler: 3.5mm 0.25mm

Soft pendulum shock device

Height: 330mm ± 15mm

Maximum diameter: 240mm±15mm

Weight: 45kg ± 0.5kg

Material: leather bag

Filler: diameter 3.5mm ± 1mm lead sand

Boiling Test Device

Power: 220V 50Hz 3Kw (Customized)

Outside Size: 400mm*255mm*480mm

Inside Size: 400mm*255mm*480mm

At most 6 samples with 300mm*300mm

Tempered Glass Flatness Measuring Instrument

Measurement of arcuate form and wave form of toughened glass

Resolution: 0.01mm

Measuring Span: 300mm-12000 mm ( Customized)

Impactor for building Glass and Metal Guardrail

Impact Steel ball

Weight: 1040g ± 10g

Dia: 63mm

Shot bag impactor

Data:

Weight: 45kg ± 0.1kg

Height: 330mm ± 13mm

Max diameter: 250mm

Material: leather bag filling lead shot

Leather thickness: 0.15mm

Lead sand size: 2.5mm

Hard and Soft Body Impactors for Opaque Wall Components

Soft body:

Weight: 50kg

Dia: 400mm

Conical canvas bag filles with 3mm glass sphere

Hard Body:

Steel Ball 0.5 kg/50mm

Steel Ball 1 kg/62.5mm



在线联系供应商

至: 秦皇岛源辰科技设备有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Clothing Mannequin Hardware Connector
Clothing Mannequin Hardware Connector Card Plate: Stainless Steel 201 Diameter: 85mm Thickness: 2mm Pin shaft: Stainless Steel 304 Diameter: 10mm Length: 120mm Surface: Industrial Surfa...
Customized Non-standard Sheet Metal Fabrication of Aluminum Profile Frame
Customized Non-standard Sheet Metal Fabrication of Aluminum Profile Frame Name: Aluminum profile frame 40*40/50*50/60*60 Size: 960 mm*730 mm*1000 mm(Customized) Material: Aluminum profile Angle pieces: aluminum alloy Scre...
Boil Test Apparatus for Safety Glazing Materials in Buildings
Boil Test Apparatus for Safety Glazing Materials in Buildings Related Standard: 1) EN ISO 12543 - 4 Glass in building -Laminated glass and laminated safety glass - Part 4: Test methods for durability – ...
Nonstandard Sheet Metal Parts-Metal Fonts
Nonstandard Sheet Metal Parts-Metal Fonts We are a manufacturer of Non-standard Sheet Metal Parts. Service:OEM ODM Non Standard Customized Processing Wire Cutting:Max Length: 700 mm Max Di...
铁路和电缆预埋件
铁路和电缆预埋件 3823管廊槽式预埋件 铁路预埋件 电缆预埋件 材质:Q235B 预埋槽规格:3823 长度:2800mm 工艺:冲压、铆接 表面:热镀锌 用途:铁路、建筑
供应产品

Same products

JCID V15系列 iPhone Android  屏幕测试仪
JCID V15系列 iPhone Android 屏幕测试仪 卖方: 深圳维客修有限公司 描述JCID V15/V15PM屏幕测试仪支持测试iPhone屏幕和Android Phone屏幕的全部功能,如iPhone LCD屏幕触摸功能测试、单色测试、图片测试和灰度测试。全新JCID ...
XZZ iSocket for iPhone 16 Plus/16 Pro Max Motherboard Layering Test
XZZ iSocket for iPhone 16 Plus/16 Pro Max Motherboard Layering Test 卖方: Phonefix XINZHIZAO XZZ iPhone 16 series 4-in-1 motherboard layered test fixture for iPhone 16/16 Plus/16 P...
WF-EDU-02 Motor & Propeller Test Kit
WF-EDU-02 Motor & Propeller Test Kit 卖方: Wing Flying Technologies Co., Ltd WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare...
WF-EDU-01 Motor and Propeller Test Kit
WF-EDU-01 Motor and Propeller Test Kit 卖方: Wing Flying Technologies Co., Ltd WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ...
WF-EN-50 Engine Test Bench
WF-EN-50 Engine Test Bench 卖方: Wing Flying Technologies Co., Ltd Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ...