EN 149 Half Mask and Meltblown Fabric Automatic Particulate Filtering Performance Efficiency Tester

The tester is used for performance testing of filter elements, disposable masks, filter media, etc. forFilter performance tester ofrespirator.It's suitable for safety testing of such products, basic filtration performance evaluation and development guidance for new products.It is applicable to the performance verification of new products , quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technic al supervisiondepartment, etc.
Automated Respirator Filter Tester for Masks:
With clean compressed air, the prepared NaCl solution or a similar solution such as DEHS/PAO are sprayed from the aerosol generator. After passing through a classifier (inertia principle), unneeded large particles are collected into the collection bottle, and particles meeting the requirements enter into the test system from the nozzle of aerosol generator.
G506Mask Automatic Filtering Performance Tester:
1. The aerosol emitted by the aerosol generator requires two treatments before reaching the tested filter material : 1. Produce aerosol salt particles by mixing with the heated gas (for salt spray).

2. Neutralize the static electricity carried by the aerosol through an electrostatic neutralizer, this treatment is to reduce the impact of particle loss and static electricity on the test results.

3. After the aerosol is processed by the above two treatments, it reaches to the surface of tested filer material at a certain flow rate (flow rate), and then the test procedure is started. For the filter efficiency test, the test time is very short, and it takes only a few seconds to complete the test. For the loading experiment, the experiment is relatively long.

The particle counter or laser scattering photometer is used to measure the concentration or mass concentration of the upstream and downstream aerosol, and to calculate the filtration efficiency. At the same time,the pressure drop on both sides of the filter is measured by the differential pressure sensor.
Standards compliant:
NIOSH 42 CFR Part 84 Respiratory protection device;
EN 143 Respiratory protective device - particulate filters - requirements,
inspections and signs;
JMOL This protective mask standard;
GB 19083 Technical requirements for medical protective mask;
GB2626 Self-priming filter type anti-particle respirator;
GB 32610 Daily protective mask technical specifications.
Several Major Features:
Smart touch screen control + test report printing
PLC control system, more efficient and reliable, programmable 7-inch color LCD touch screen,Achieve a variety of functions such as control, detection, calculation and data display.
Multiple test fixtures:
The instrument has a variety of test fixtures that can test different types of masks.
High degree of automation:
The device is designed as a double control pneumatic clamping method, which is easy to operate and has high safety.
Powerful built-in function:
The equipment can test the penetration efficiency, penetration resistance and flow rate. At the same time, the flow pressure difference of the equipment can be set arbitrarily, thus satisfying various experiments, stable performance and good repeatability of test data.


至: 千实精密机电仪器检测设备有限公司
Your E-mail:

Send to other suppliers

Other supplier products

spray water repellency tester
spray water repellency tester Water Repellency Tester is used to check the water repellency of the fabric by spray test in textile testing laboratory. Suitable for Table cloth, ...
Multi-Functional Scratch Tester
Multi-Functional Scratch Tester Introductionscratches, plastic scraper three kinds of automotive industry common test methods into one.It is suitable for a variety of automotive i...
Medical face mask particle protection tester
Medical face mask particle protection tester Medical face mask particle protection testercan be used to detect the filtration efficiency and resistance of particles such as masks and filter ma...
light box color assessment cabinet
light box color assessment cabinet The Qinsun Color Assessment Cabinet can accommodate up to 4 light sources. The light sources can be specified by you, to meet your own specific nee...
IULTCS Rubbing Color Fastness Tester
IULTCS Rubbing Color Fastness Tester This instrument is used to test the rubbing fastness of leather surface under dry friction and wet friction as well as other test conditions. Basic...

Same products

KRD30-10 离心式稳态加速度试验机
KRD30-10 离心式稳态加速度试验机 卖方: 科瑞迪机电设备有限公司 KRD30系列离心式稳态加速度试验机用于评估元器件、设备及其他电工电子产品在恒加速度环境(重力除外)下的结构适应性和性能是否良好,并获得试品的电参数。 先进的控制系统:全自动计算机...
KRD42 双边提升零跌落试验台
KRD42 双边提升零跌落试验台 卖方: 科瑞迪机电设备有限公司 KRD42系列包装产品跌落试验机主要应用于包装货物在运输,搬运作业过程中会受到垂直跌落的撞击,通过对包装货物进行规范的试验(面跌落,角跌落,棱跌落等)采集数据,对包装的缓冲减振设计,包装材料的选...
KRD17 气动双向垂直冲击试验台
KRD17 气动双向垂直冲击试验台 卖方: 科瑞迪机电设备有限公司 气动双向垂直冲击试验台是针对一些不能或不易翻转的大型试品设计研发的新型产品,可完成垂直方向的向上和向下冲击试验。 l 气压驱动,对环境无污染。 l 一机多用,一次装夹,完成向上和向下的冲击和...
KRD32 非标离心式恒加速度试验机
KRD32 非标离心式恒加速度试验机 卖方: 科瑞迪机电设备有限公司 KRD32系列非标离心式恒加速度试验机是为军工产品做模拟动态离心运动﹑双环境力离心运动和中心高速旋转运动等方式的一种测试手段,以考核电子元器件、小型组件和其他电工电子产品的抗荷性能及检测抗荷性能...
KRD41 小型跌落试验台
KRD41 小型跌落试验台 卖方: 科瑞迪机电设备有限公司 RD41系列小型跌落测试仪适用于小型消费电子产品和组件的自由落体测试,例如手机,对讲机,电子词典,CD / MD / MP3等,适用标准JISC 0044和IEC 60068-2-32。通过对电...