.

Factory price for face mask Filtering Efficiency Comprehensive performance tester

The tester is used for performance testing of filter elements, disposable masks, filter media, etc. forFilter performance tester ofrespirator.It's suitable for safety testing of such products, basic filtration performance evaluation and development guidance for new products.It is applicable to the performance verification of new products , quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technic al supervisiondepartment, etc.
Automated Respirator Filter Tester for Masks:
With clean compressed air, the prepared NaCl solution or a similar solution such as DEHS/PAO are sprayed from the aerosol generator. After passing through a classifier (inertia principle), unneeded large particles are collected into the collection bottle, and particles meeting the requirements enter into the test system from the nozzle of aerosol generator.
G506Mask Automatic Filtering Performance Tester:
1. The aerosol emitted by the aerosol generator requires two treatments before reaching the tested filter material : 1. Produce aerosol salt particles by mixing with the heated gas (for salt spray).

2. Neutralize the static electricity carried by the aerosol through an electrostatic neutralizer, this treatment is to reduce the impact of particle loss and static electricity on the test results.

3. After the aerosol is processed by the above two treatments, it reaches to the surface of tested filer material at a certain flow rate (flow rate), and then the test procedure is started. For the filter efficiency test, the test time is very short, and it takes only a few seconds to complete the test. For the loading experiment, the experiment is relatively long.

The particle counter or laser scattering photometer is used to measure the concentration or mass concentration of the upstream and downstream aerosol, and to calculate the filtration efficiency. At the same time,the pressure drop on both sides of the filter is measured by the differential pressure sensor.
Standards compliant:
NIOSH 42 CFR Part 84 Respiratory protection device;
EN 143 Respiratory protective device - particulate filters - requirements,
inspections and signs;
JMOL This protective mask standard;
GB 19083 Technical requirements for medical protective mask;
GB2626 Self-priming filter type anti-particle respirator;
GB 32610 Daily protective mask technical specifications.
Several Major Features:
Smart touch screen control + test report printing
PLC control system, more efficient and reliable, programmable 7-inch color LCD touch screen,Achieve a variety of functions such as control, detection, calculation and data display.
Multiple test fixtures:
The instrument has a variety of test fixtures that can test different types of masks.
High degree of automation:
The device is designed as a double control pneumatic clamping method, which is easy to operate and has high safety.
Powerful built-in function:
The equipment can test the penetration efficiency, penetration resistance and flow rate. At the same time, the flow pressure difference of the equipment can be set arbitrarily, thus satisfying various experiments, stable performance and good repeatability of test data.



在线联系供应商

至: 千实精密机电仪器检测设备有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Medical Face Mask Air Exchange Pressure Difference Tester
Medical Face Mask Air Exchange Pressure Difference Tester The Medical Face Mask Air Exchange Pressure Difference Tester is used for the determination of gas exchange pressure difference of medical surgical...
Dry Cleaning And Washing Cylinder
Dry Cleaning And Washing Cylinder Dry Cleaning And Washing Cylinder Testing Standards: AATCC 162, 16 CFR Part 1610 Applications: Dry Cleaning and Washing Cylinder is designed fo...
building insulated material combustion tester
building insulated material combustion tester According to GB / T8626, ISO11925 development, suitable for the absence of external radiation conditions, with a small flame directly impact the ve...
Taber abrasion resistance test machine from qinsunlab
Taber abrasion resistance test machine from qinsunlab Range of application TABER abrasion resistance tester and wear resistance tester apply to the abrasion resistance performance test on fabric, cardb...
iso 6940 fabric textile vertical flammability tester
iso 6940 fabric textile vertical flammability tester Vertical Flammability Chamber for measuring the vertical flame spread for childrens’ sleepwear, fabrics, other textile materials or resilient...
供应产品

Same products

Tempered Glass Impact Strength Test Equipment
Tempered Glass Impact Strength Test Equipment 卖方: 秦皇岛源辰科技设备有限公司 Tempered Glass Impact Strength Test Equipment Function:Determining the resistance of glazing mat...
气压驱动垂直冲击/碰撞试验台
气压驱动垂直冲击/碰撞试验台 卖方: 科瑞迪机电设备有限公司 KRD11系列气动垂直冲击/碰撞试验台设计先进,自动化程度高,可靠性高,操作简单,维护方便。该系统既能满足冲击和碰撞试验的要求,又能进行常规的半正弦波、峰后锯齿波、方波等波形冲击试验。 气动驱...
夹持力试验机
夹持力试验机 卖方: 科瑞迪机电设备有限公司 KRD102夹持力试验机是提高产品质量不可缺少的测试手段。适用于电子、机电、光电、汽车、玩具、包装等行业的研发、质量控制和制造。它可以模拟货物从集装箱运输到仓库时集装箱内货物被夹住的情况。货物是...
包装抗压强度试验机
包装抗压强度试验机 卖方: 科瑞迪机电设备有限公司 KRD101包装抗压强度试验机是用来评价包装的压缩强度,以防止产品在搬运、堆放、贮存、运输过程中因包装强度不足而变形或损坏。本机是瓦楞纸箱包装性能及综合指标的主要检测设备之一,是造纸、包装、商检...
斜面冲击试验机
斜面冲击试验机 卖方: 科瑞迪机电设备有限公司 KRD100系列斜面冲击试验机模拟了产品包装在实际环境中的抗冲击损伤能力,如搬运、货架堆放、电机滑动、机车装卸、产品运输等,也可作为科研机构常用的试验设备,高校、包装技术试验中心、包装材料制造厂...