.

Photovoltaic module damp heat test chamber

Standard

IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

UL 1073: Standard for Safety for Enclosures for Electrical Equipment

ISO 16750-4: Road Vehicles – Environmental Conditions and Testing for Electrical and Electronic Equipment

CE Certification(Conformité Européenne)

Product Advantages

Extreme Environmental Simulation

85°C ±2°C / 85% RH Control: Replicates 10+ years of tropical aging in 1.000 hours (IEC 61215-compliant).

95% RH Max Humidity: Tests PID resistance and encapsulant degradation under extreme moisture.

Ultra-Stable Performance

±1°C Temperature Stability: Ensures consistent testing across 10.000+ cycles.

≤2°C Uniformity: Patented airflow design eliminates hot/cold spots.

Energy Efficiency

40% Lower Power Consumption: Advanced insulation and heat recovery systems.

ECO Mode: Auto-powers down during stabilization phases.

Safety First

Dual Overload Protection: Thermal cutout and current-limiting circuit breaker.

Door Interlock System: Prevents accidental chamber access during testing.

Smart Diagnostics

AI-Powered Degradation Prediction: Analyzes IV curve shifts and EL imaging data.

Remote Monitoring: 4G/LTE connectivity with SMS/ alerts.

Product Features

Dual-Chamber Design: Isolated wet/dry zones for simultaneous multi-condition testing.

10” Touchscreen HMI: Preloaded IEC/UL test profiles with customizable hold times.

Self-Cleaning System: Automated condensation drainage and chamber drying.

Modular Expansion: Up to 1.500L capacity for full-size PV array testing.

Glovebox Compatibility: Oxygen/moisture control for sensitive electronics testing.

Accessories Included

Testing Kit:

4x universal sample racks (adjustable for batteries/PV modules/PCBAs).

10x humidity sensor calibration capsules.

Software Suite:

License key forEnviroTest Pro(Windows/Linux).

1-year free access to cloud-based test report generator.

Calibration & Safety:

NIST-traceable temperature/humidity logger.

Emergency eyewash station (portable).

Maintenance Kit:

Spare heating elements and refrigerant filters.

Chamber cleaning solution (non-corrosive).

Documentation:

Multilingual quick-start guide (printed + digital).

Compliance certificates for IEC/UL/ISO standards.

Technical Parameters

ParameterSpecification
Temperature Range 30°C to 85°C (operational)
Temperature Stability ±1°C (at 85°C setpoint)
Temperature Uniformity ≤±2°C (empty chamber)
Humidity Range 30%–95% RH (non-condensing)
Humidity Stability ±2.5% RH (at 85% RH)
Chamber Volume 500L (standard), expandable to 1.500L
Power Supply 380V/415V 3-phase, 50/60Hz
Dimensions 1.200mm (W) × 1.800mm (D) × 2.000mm (H)
Weight 800 kg (net) / 1.200 kg (gross)


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Liquid Sustained Combustion Tester
Liquid Sustained Combustion Tester Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 32.5.2 Test L...
 Intramedullary Nails Four - point Bending Fatigue Tester
Intramedullary Nails Four - point Bending Fatigue Tester Standard YY/T 0591-2011: Chinese standard specifying bending fatigue test methods for intramedullary nails and locking screws, including load appl...
Keyboard Key Life Tester
Keyboard Key Life Tester standards GB/T4967-95 silicone rubber and keypad life testing equivalent to JIS and IEC standards Experimental principle The use of a motor driv...
Face Mask Tensile Tester
Face Mask Tensile Tester Introduction: The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ...
Building material monomer combustion tester
Building material monomer combustion tester Monomer building materials combustion equipment is used to determine the construction materials or products (not including floor materials and the ...
供应产品

Same products

Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 卖方: Standard International Group (HK) Limited The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
Xenon Test Chamber
Xenon Test Chamber 卖方: Standard International Group (HK) Limited Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
Single Cable Vertical Flame Tester
Single Cable Vertical Flame Tester 卖方: 上海千实精密仪器 Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
Safety Helmet Flammability Tester
Safety Helmet Flammability Tester 卖方: 上海千实精密仪器 Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
Furniture flammability tester
Furniture flammability tester 卖方: 上海千实精密仪器 Product details Furniture flammability tester is mainly used to test the combustion performance ...