Cleanliness automatic extractor

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Component Cleanliness Cabinet equipped with cleaning modes such as pressure jet cleaning, perfusion cleaning, spray cleaning, etc., the cleaning agent's on-line filtration and membrane making, circulating fine filtration and recovery functions realize the synchronous cleaning of parts and the filtration and recovery of particulate pollutants, which can collect the particulate pollutants on the surface of parts to the surface of filter membrane in time, and the filter membrane samples can be obtained after cleaning the parts, thus reducing the retention time of particulate pollutants in the cleaning agent; It subverts the traditional manual cleaning and testing method, standardizes the cleanliness testing process and improves the testing efficiency.

Component Cleanliness Cabinet’s working status is displayed in real time, and the cleaning pressure and flow are adjustable. With different cleaning nozzles, it can quickly and easily clean the inner cavity channels, blind holes, and pollutants on the overall surface of the parts. It is widely used in the cleanliness detection of various auto parts. Particulate matter extraction and sample preparation. Meet ISO16232-2007. VDA19.1. GB/T3821-2005 and other technical cleanliness testing standards and enterprise-defined standards, and meet the extraction and sample preparation of surface particulate matter from major auto parts such as Tesla, Volkswagen, GM, and Ford.

Product Introduction:

The cleanliness extraction equipment is mainly used to clean the cavity channels, blind holes, and the overall surface of the parts, and complete the extraction of particles.

It meets the international and domestic standards such as 1SO16232-2007. VDA19. GB/T3821-2005. and meets the cleanliness testing standards of Volkswagen, GM, Ford and other major automobile factories. It is widely used in the detection of surface cleanliness of various auto parts. For example: engine cylinder block, cylinder head, gear, crankshaft, connecting rod, camshaft, valve, piston, rocker arm, transmission shaft pin, oil pump, water pump, turbocharger, oil pipe and other parts and assembly cleanliness test.

Meet the standards：

ISO16232.VDA19.ISO4406.DIN51455

Application：

This equipment comes standard with high-pressure automatic spraying, manual high-pressure washing and high-pressure perfusion cleaning, and is widely used for particle extraction and sample preparation when testing the surface cleanliness of various automobile parts. For example: engine block, cylinder head, gear, crankshaft, connecting rod, camshaft, valve, piston, rocker arm, transmission shaft pin, oil pump, water pump, turbocharger, oil pipeline and other components and assembly cleanliness inspection. You can also add a special ultrasonic cleaning unit for small component and upgrade it to JC1299 Pro Component Cleanliness Cabinet.

Operating Process：

1. Take out the filter membrane to be filtered and detected (5μm filter membrane is adopted by default, and the customer can specify the filter membrane with corresponding specification accuracy) and place it in an oven at a setting temperature of 80 degrees Celsius, and the drying time is generally 30 minutes;

2. Put the dried filter membrane in a drying dish and cool it at room temperature for 30 minutes;

3. The filter membrane cooled to room temperature is taken out and placed in an electronic balance (0.1mg accuracy) to weigh the filter membrane and record the value G1;

4. The weighed filter membrane is placed at the filter membrane holder of JC1299 Component Cleanliness Cabinet;

5. The workpiece to be tested is placed in the cleaning chamber of the JC1299 Component Cleanliness Cabinet, and the parameters to be pressure flushed are input, the pressure range is 0-0.6Mpa, and the liquid storage tank is 30L;

6. After the parameters are set, the workpiece starts to be washed. At this time, the equipment automatically filters the membrane and fine filtration for recovery. After the entire cycle of washing the workpiece, take out the filter membrane at the filter membrane holder;

7. Take out the filter membrane and place it in an oven at 80 degrees for 30 minutes;;

8. Put the dried filter membrane in a drying dish and cool it at room temperature for 30 minutes;

9. The filter membrane cooled to room temperature is taken out and placed in an electronic balance (0.1mg accuracy) to weigh the filter membrane and record the value G2;

10. At this time, the workpiece is checked for weight G=G2-G1 according to the weighing method;

11. After the filter membrane is weighed, it is placed in the cleanliness detection and analysis system to analyze the particles on the filter membrane;

Technical parameters:

Pressure cleaning chamber size (mm) : 700*600*700

Machine size (mm) : 1250*900*2150

Storage tank capacity (L) : 25

Full color touch screen: Siemens

Three-stage cycle filtration: 0.22um three-stage series cycle filtration

Three-stage filter membrane: one-click automatic clamping, specifications 847mm, 850mm, according to customer custom

Automatic lifting door: one key automatic uniform speed lifting

Special high cleaning pump: special high pressure pump

Cleaning room material: 8K mirror 304 stainless steel

Programmable controller: digital programmable controller

Spray cleaning method: spray pen/spray gun

Cleaning collection pipe: The pipe adopts food-grade internal and external polishing sus304 one-time forming pipe

Other supplier products

	ISO 20566 Car Wash Lap Apparatus Manufacturer & Supplier	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The ISO 20566 Wheel Scratch Resistance Laboratory Car Wash Simulator is a pre...
	ASTM D3702 Load-Controlled Friction and Wear Testing Machine for Tribology Research	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Load-Controlled Friction and Wear Testing Machine is designed for compreh...
	Photovoltaic environmental acid mist chamber ASTM B117 standard	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Photovoltaic Acid Mist Test Chamber is a specialized environmental simula...
	Medical Injection Needle Stiffness Measuring Device	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB 18457-2001 This standard mandates precise control over needle wall thickness ...
	Vacuum Blood Collection Tube Suction Volume Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com In the medical field, particularly in processes involving blood sample collection, the accu...

供应产品

Same products

	FH-77富氢测试笔	卖方: 科立龙电子股份有限公司	产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ...
	Xenon Arc Weather Ometer	卖方: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	卖方: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	卖方: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	卖方: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...