.

Solid Auto - ignition Point Tester

Product Introduction

This tester determines the self - ignition characteristics of solid chemical products by placing the substances in a 20mm - side - length cubic wire mesh and increasing the temperature. It complies with standards such as GB/T 21756 - 2008 *Determination of the Relative Self - Ignition Temperature of Solid Substances in Chemical Products for Industrial Use* and NF T20 - 036.

Product Features

1. It adopts an embedded processor and the Windows CE operating system.

2. With an 8 - inch liquid - crystal touch screen, it can display the test status in real - time.

3. It supports two working modes, the "standard mode" and the "custom mode" (during the custom experiment, it can save the exothermic peak value in real - time, etc.), taking into account both the standardization and flexibility of the test.

4. It integrates high - temperature heat - insulation technology, temperature control, and precise detection technology.

5. It uses an electrically heated muffle furnace with natural air - circulation convection to ensure uniform heating of the samples.

6. The furnace cavity is made of heat - insulating vacuum ceramic fiber, which has a good heat - insulation effect.

7. The cubic wire mesh is hung at the bottom of the furnace cover, making it safe and convenient to place samples.

8. It realizes automatic heating control, temperature control, and combustion detection.

9. A cleaning rod is provided for cleaning the inner cavity's central through - hole.

10. A debris tray is provided to collect samples falling from the wire mesh and residual samples cleaned out by the rod.

11. A cooling bracket is provided to place the assembled furnace cover on it for cooling after the test.

12. It uses a thermocouple sensor to quickly and accurately respond to temperature changes.

13. It displays the time - temperature curve in real - time, and the original data can be viewed.

14. The test process is fully automated, requiring no manual intervention. It supports functions such as parameter setting, data storage, and report viewing.

Technical parameters

Working Environment

(540)℃, <85%RH

Test Objects

Solid

Temperature Control Range

Room temperature650℃

Standard Rise Rate

0.5 ℃/min

Customized Rise Rate

(0.13.0)℃/min

Temperature Measurement Range

(0800)℃

Temperature Measurement Resolution

0.1 ℃

Temperature Measurement Accuracy

±2.5 ℃ below 300 ℃

Heating Chamber Capacity

±(0.75% of the reading) above 300 ℃

Timing Range

2L

Mesh Cage Size

(096)h


在线联系供应商

至: 上海千实精密仪器
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Electric pencil hardness test device
Electric pencil hardness test device Product Introduction: This machine is suitable for all kinds of finished product spray hardness test, such as: mobile shell, laptop computer shel...
Flame Propagation Testing Machine (for Flame Spread Test Machine)
Flame Propagation Testing Machine (for Flame Spread Test Machine) The tester is used for flame spread test of protective clothing. It is designed and manufactured according to ISO 15025 Standard for Protective Clo...
Automatic freezing point pour point cold tester
Automatic freezing point pour point cold tester Product Introduction: The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f...
Liquid Sustained Combustion Tester
Liquid Sustained Combustion Tester Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 32.5.2 Test L...
Diaper impurity testing machine
Diaper impurity testing machine Introduction: The diaper impurity detector is used to detect the impurities remaining inside the diaper under a certain strong light irradiation. ...
供应产品

Same products

Xenon Test Chamber
Xenon Test Chamber 卖方: Standard International Group (HK) Limited Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
Single Cable Vertical Flame Tester
Single Cable Vertical Flame Tester 卖方: 上海千实精密仪器 Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
Safety Helmet Flammability Tester
Safety Helmet Flammability Tester 卖方: 上海千实精密仪器 Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
Furniture flammability tester
Furniture flammability tester 卖方: 上海千实精密仪器 Product details Furniture flammability tester is mainly used to test the combustion performance ...
Flame retardant testing machine
Flame retardant testing machine 卖方: 上海千实精密仪器 Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers...