Protective Clothing Synthetic Blood Penetration Tester

Introduction

It is applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test pressure.

Standard

GB 19082-2003《Medical disposable protective clothing technology requires synthetic blood penetration test method》;

ASTM F1670 / F1670M - 17a Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood

working principle

Under constant pressure, the synthetic blood was tested on the protective clothing material, and the penetration of blood was synthesized on the visual inspection material.

Sample preparation

In the sample of each protective suit, 3 pieces (75*75) mm are randomly selected. When conducting the experiment on the composite or multi-layer materials, the edges should be sealed and the diameter shoud be kepted greater than 57mm for testing.

Instrument characteristics

1. The instrument adopts the air source which can provide (0.5---30 + 0.1)kPa pressure to continuously pressurize the sample, and is not subject to the space limitation of the test site;

2. The range of air pressure can be set freely and set range (0.5---30)kPa;

3. Color touch screen display, Chinese and English operation menu, user can freely choose the language operation;

4. The sample surface is made of imported special aluminum profiles, with light material, smooth surface and never rust;

5. The instrument adopts imported special aluminum drawing panel with metal buttons;

6. The instrument is equipped with a sample automatic clamping device without manual clamping;

7. The test tank is equipped with special fixed device to facilitate customer operation;

8. The test tank is made of high quality 316 stainless steel, with high transparent and high intensity protective cover.

9. Square metal block: open space is more than 50%; Under 30kPa, the bending is less than 5mm;

10. The precision of instrument time control is less than 0. 1 second;

11. High quality metal baking paint is used for the whole machine shell.

Technical Parameters

1. Pressure range and measurement accuracy: 0 ~ 0.04MPa (4mH2O) (31.4kg) accuracy: + 1kPa.

2. Sample size: 75mm * 75mm, under pressure area: 28.26 square centimeters.

3. Power supply: AC220V, 50Hz, 100W.

Other supplier products

	Leather Water Vapor Permeability Tester	Productinformation The vaporpermeability of leather is evaluated by means of measuring the weight of water-vapor that permeates to specimen peruni...
	Alcohol abrasion tester	The Alcohol Abrasion Tester is designed for evaluating the wear and friction resistance of coatings, prints, and surfaces under controlled laborato...
	Sliding bearing PV friction testing machine	The testing machine can monitor the changes in friction force and the wear condition of the sample surface in real time during the test, and also p...
	Cleanliness automatic extractor	Component Cleanliness Cabinet equipped with cleaning modes such as pressure jet cleaning, perfusion cleaning, spray cleaning, etc., the cleaning ag...
	Motor Accessories Combustion Chamber,FMVSS 302; ISO 3795; ASTM D5132-04	Introduction: This machine is designed according to ISO3795 standards and relevant clauses. Apply to identify vehicles (cars, multipurpose passeng...

供应产品

Same products

	Plastic Smoke Density Tester F313	卖方: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	卖方: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	卖方: 上海千实精密仪器	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	卖方: 上海千实精密仪器	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	卖方: 上海千实精密仪器	Product details Furniture flammability tester is mainly used to test the combustion performance ...