Photovoltaic module wire tube bending testing machine

Standard

IEC 61730-2:2004: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing

CE Certification(Conformité Européenne)

Product Advantages

IEC 61730-2 Compliance

120 Hz Max Frequency: Simulates 20+ years of cable flexing in 1.000 hours.

1–9.999s Timing: Customizable test durations for accelerated life testing.

Precision Control

0.1 Hz Resolution: Ensures repeatable bending cycles per IEC standards.

Auto-Stop at Failure: Immediate cycle interruption during conduit cracking.

Energy Efficiency

100W Power Consumption: Low-energy servo motor design.

Sleep Mode: Auto-powers down between test sequences.

Safety First

Emergency Shutoff: Dual redundant safety circuits with E-stop button.

Overload Protection: 150% max torque cutoff for delicate wires.

User-Centric Design

7” HD Touchscreen: Multi-touch gestures for live force-displacement graphing.

Voice-Guided Setup: Step-by-step audio prompts for operators.

Product Features

Quick-Change Fixtures: Adapts to 2–20 mm diameter PV cables/conduits.

Dynamic Force Feedback: 0.1N resolution load cell with real-time bending angle display.

Self-Calibrating System: Auto-tare and linearity checks before each test.

Rust-Resistant Frame: 304 stainless steel construction with epoxy coating.

Data Logging: USB/Ethernet export of test cycles, peak forces, and failure points.

Accessories Included

Testing Kit:

10x conduit clamps (2–20 mm range).

5x calibration weights (1N–10N).

Software Suite:

License key forBendTest Pro(Windows/macOS).

1-year free access to cloud-based fatigue analysis tools.

Calibration & Safety:

NIST-traceable torque wrench.

Insulated gloves (Class 0. 3 pairs).

Maintenance Kit:

Spare drive belts and bearings.

Machine cleaning solution (non-corrosive).

Documentation:

Multilingual quick-start guide (printed + digital).

Compliance certificates for IEC/UL/ISO standards.

Technical Parameters

Parameter	Specification
Frequency Range	0–120 Hz (adjustable)
Spindle Speed	N RPM = Frequency Hz / 60
Timing Range	1–9.999 seconds (1–166.65 minutes)
Force Resolution	0.1N (10 kgf max capacity)
Bending Angle Accuracy	±1° (via rotary encoder)
Power Supply	220V AC, 50/60Hz (single-phase)
Dimensions	500mm (W) × 400mm (D) × 600mm (H)
Weight	45 kg (net) / 60 kg (gross)

Other supplier products

	Salt Spray Testing Machine	Meet the standard: GB/T2423.17 Product Introduction: This type of salt spray test chamber is one of the artificial climate environmental “...
	Xenon Test Chamber	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunlight spectrum, including ultraviolet, visible light...
	Reciprocating Wear Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM F2496: Scratch hardness and adhesion testing for prints/coatings. ISO 1518...
	Textile Fiber Composition Analyzer tester	Standard ASTM D276(Standard Test Method for Identification of Fibers in Textiles) ISO 1833(Determination of Fiber Content in Textiles) AATCC 2...
	Multiphase High - temperature and High - pressure Explosion Limit Tester	Reference Standards: EN 1839 ASTM E918 ASTM E2079 EN 15967 UL9540A Product Features: Technical parameters: Operating Environment (...

供应产品

Same products

	Plastic Smoke Density Tester F313	卖方: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	卖方: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	卖方: 上海千实精密仪器	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	卖方: 上海千实精密仪器	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	卖方: 上海千实精密仪器	Product details Furniture flammability tester is mainly used to test the combustion performance ...