Helmet Xenon Aging Tester
Standards
GB/T2014-9-19. ISO 4892
ASTM G151. G154. D4329
d4587、d4799、sae j2020
Xenon lamp aging test box structure
1. the box is molded by CNC machine tool processing, beautiful and generous shape, the lid is two-way flip type, easy to operate.
2. the inner liner is made of imported stainless steel plate, the outer liner is sprayed with A3 steel plate, which increases the appearance of texture and cleanliness.
3. heating mode for the inner liner sink heating, warming fast temperature distribution.
4、Drainage system using back to the vortex type and U-type sedimentation device drainage, convenient for users to clean.
Helmet xenon lamp aging test chamber applications
Xenon lamp aging test chamber, also known as xenon arc lamp aging test chamber, the application of a wide range of industries, such as: coatings ink paints, resins, plastics, printing and packaging, adhesives, automotive and motorcycle industries, cosmetics, metals, electronics, electroplating, pharmaceuticals, etc. Xenon arc lamp aging test chamber can quickly and realistically reproduces the sunlight, rain, dew on the materials of the damage: it takes only a few days or a few weeks Q8 to reproduce outdoor need months or years To produce damage: including fading, discoloration, brightness loss, chalking, cracking, blurring, embrittlement, strength loss and oxidation.
Xenon lamp aging test chamber features
1. the specimen installation thickness can be adjusted, the specimen is fast and easy to press and install.
2. the upward rotating door does not hinder the user to operate the equipment, only occupies a small space.
3. unique condensation system using ordinary tap water can meet the requirements.
4、Water heater is under the container, not immersed in water, long life, easy maintenance.
5、Water level control is placed on the outside of the UV box, easy to monitor.
6. the equipment has casters, easy to move, casters are standard accessories.
8、Computer programming is convenient, misoperation and fault automatic alarm. Light intensity programmable
9. there amplitude illumination calibrator calibration can extend the lamp life (longer than 1600 hours).
9. there are Chinese and English manual, easy to access.
10. divided into ordinary, light amplitude illumination control type, spray type.
Xenon lamp aging test chamber technical parameters
1. the condensing device simulates the effect of outdoor humidity, the humidity can be achieved
2. there is an electronic eye irradiance control system
3. through the blackboard temperature sensor to measure the temperature accurately, can be repeated to reproduce the test results
4、Humidity, condensation, water spray can cycle continuous test
5. amplitude illuminance with CR-10 calibrator traceability and automatic calibration procedures
6. the number of test samples: 75mm × 300mm samples 24 75mm × 150mm samples 48 pieces
Xenon lamp aging test chamber control system
1. light and condensation of independent control time and alternate cycle control time can be set arbitrarily within 999h.
2、French “Schneider” components, Philips rectifier and starter (to ensure that each boot can light up the ultraviolet lamp).
3、Using black aluminum plate to connect the temperature sensor, using the blackboard temperature, instrument control heating, temperature is more stable.
4、Radiometer probe adopts fixed type, without loading and unloading every time.
5. radiation using high-precision display and measurement of ultraviolet irradiance meter.
6. light and condensation can be duly controlled can alternate cycle control.
在线联系供应商
Other supplier products
 |
DSC Differential Scanning Calorimeter tester | The Differential Scanning Calorimeter (DSC) measures the heat flow to or from a sample under controlled heating conditions. A small amount of sampl... |
 |
Wet Microbial Penetration meter | The wet microbial penetration tester is mainly used to evaluate the barrier ability of medical protective equipment (such as surgical gowns, isolat... |
 |
Conveyor Belt Drum Friction Testing Machine | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction testing machine has extensive application value in mu... |
 |
Single-Flame Source Tester En ISO 11925-2 | Introduction This instrument is designed according to ISO 11925-2. it is used to test building material under conditions in the absence of external... |
 |
Bone Screw Pull-out Tester | Standard YY/T 1504. ASTM F543: standard specifies a test method for measuring the axial force required to extract or fail a metallic bone screw f... |
Same products
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | 卖方: 上海千实精密仪器 | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
