Micro Controll Four-ball Friction Tester
Applicable Standards：
When conducting tests, the microcomputer - controlled four - ball friction testing machine needs to comply with the following relevant national or international standards: GB/T 12583 - 98: Method for Determination of the Extreme - Pressure Properties of Lubricants (Four - ball Machine Method). GB 3142 - 82: Method for Determination of the Load - Carrying Capacity of Lubricants (Four - ball Method). SH/T 0189 - 92: Method for Determination of the Anti - wear Properties of Lubricating Oils (Four - ball Machine Method). SH/T 0202 - 92: Method for Determination of the Extreme - Pressure Properties of Greases (Four - ball Machine Method). SH/T 0204 - 92: Method for Determination of the Anti - wear Properties of Greases (Four - ball Machine Method). These standards specify the requirements for the test methods, test conditions, data processing, etc. of the four - ball friction testing machine to ensure the accuracy and comparability of test results.
Technical Parameters：
Test force range (infinitely adjustable)： 60N~10kN
Relative error of test force： ±1%
Test force long time holding error： ±1%F.S
Friction force test range： 0~300N
Friction force test error： ±3%
Spindle rotation speed range (infinitely adjustable)： 200~2000r/min
Spindle rotation speed error： ±5 r/min
Temperature control range of the friction side Room temperature~：150°C
Temperature control error of the friction side： ±2○C Test time control range 1sec~999hours Test time control range 1~9999999999rpm Test steel ball φ12.7mm Overall dimension 100*870*1700 (Test ball Temperature control error ±2○C
Test time control range： 1sec~999hours
Spindle speed control range： 1~99999999 rpm
Test steel ball： φ12.7mm
Overall dimensions： 1200*870*1700 (mm)
Weight：800kg
在线联系供应商
Other supplier products
 |
Battery short-circuit tester | The device is designed based on a variety of battery short-circuit test standards. According to the standard requirements, the short-circuit devic... |
 |
Dry Sand Rubber Wheel Wear Tester | Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi... |
 |
Dry Cleaning & Washing Cylinder | IntroductionThe dry cleaning and washing cylinder consists of a stainless steel rotary test chamber and a multi-speed drive with a digital timer.It... |
 |
Multilayer geotextile single-layer thickness tester | Scope of application: The multi-layer sample is mechanically separated and the thickness of each single layer of the sample is measured under the ... |
 |
Mask respiratory resistance meter | Respirator Breathing Resistance Tester is used to measure the respiratory resistance and expiratory resistance of respirators and masks under the s... |
Same products
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
