Hydrogen Sulfide Corrosion Test Chamber
Referenced Standards:
Complies with national standard GB/T 978.9-88 "Corrosion Test of Metal and Non-Metal Coatings Under Condensing Sulfur Dioxide", international standard ISO 6988. QB/T 3831 "Color Change Resistance Test for Metal Plating and Chemical Treatment Layers", GB 2423.20-81 "Hydrogen Sulfide Test for Electrical Products", and other relevant global corrosion standards.
Model Specifications:
Device Name: Hydrogen Sulfide Corrosion Test Chamber, Gas Corrosion Test Chamber
Model Series: H2S-150. H2S-250. H2S-750. H2S-010
Key Performance Indicators:
1. Temperature control: ±0.5℃/±2℃ stability
2. Gas generation: Bottled gas supply system
3. Concentration regulation: 0.1~1% (v/v) precision control
4. Humidity control: 93%~98% RH with ±2% deviation
5. Heating system: Titanium alloy nickel-chromium heater with PID+SRR synchronization
6. Safety protection: Leak detection, short-circuit protection, over-temperature protection
7. Control system: Imported PID microcomputer controller with 0.1℃ resolution
8. Sample holders: 6 V-shaped corrosion-resistant racks + 12 O-shaped test rods
Environmental Requirements:
Ambient temperature: 25℃~35℃
Ambient humidity: ≤75% RH
Power supply: AC 220V/50Hz
Technical Parameters:
| Model | Inner Chamber Size (W×D×H) | Outer Dimensions (L×W×H) | Power Consumption (kW) | Temperature Range | Humidity Range | Gas Concentration |
|---|---|---|---|---|---|---|
| H2S-150 | 450×600×450mm | 680×1000×1050mm | 1.1 | 25℃~40℃ | 93%~98% RH | 25±5ppm |
| H2S-250 | 600×900×500mm | 850×1420×1120mm | 1.2 | 25℃~40℃ | 93%~98% RH | 25±5ppm |
| H2S-750 | 750×1100×500mm | 1000×1650×1320mm | 2.1 | 25℃~40℃ | 93%~98% RH | 25±5ppm |
| H2S-010 | 850×1300×550mm | 1150×1900×1370mm | 2.2 | 25℃~40℃ | 93%~98% RH | 25±5ppm |
Additional Notes:
1. All specifications measured under standard ambient conditions (25℃, no load)
2. Customized non-standard models available upon request
在线联系供应商
Other supplier products
 |
Conditioning Chamber | Features and Benefits 1.The compressor, condenser and other power components are separated from theworkroom, reducing the equipment footprint. 2.... |
 |
Light transmittance fog meter | Applicable standards: GBT 2410-2008: Determination of light transmittance and fog degree of transparent plastics. This is the national standard of... |
 |
Haze meter | Standard The Haze Meter STDYH40 adheres to global standards includingASTM D1003/1044,ISO 13468/14782,JIS K7105, andGB/T 2410, ensuring compliance ... |
 |
Spectrodensitometer | Standard The SpectroDensitometer YD5000 complies with international standards includingISO 5-4.CIE No.15. andISO 13655. ensuring reliable and stan... |
 |
Mechanical load testing machine for photovoltaic modules | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photovo... |
Same products
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | 卖方: 上海千实精密仪器 | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
