Helmet Xenon Aging Tester
Standards
GB/T2014-9-19. ISO 4892
ASTM G151. G154. D4329
d4587、d4799、sae j2020
Xenon lamp aging test box structure
1. the box is molded by CNC machine tool processing, beautiful and generous shape, the lid is two-way flip type, easy to operate.
2. the inner liner is made of imported stainless steel plate, the outer liner is sprayed with A3 steel plate, which increases the appearance of texture and cleanliness.
3. heating mode for the inner liner sink heating, warming fast temperature distribution.
4、Drainage system using back to the vortex type and U-type sedimentation device drainage, convenient for users to clean.
Helmet xenon lamp aging test chamber applications
Xenon lamp aging test chamber, also known as xenon arc lamp aging test chamber, the application of a wide range of industries, such as: coatings ink paints, resins, plastics, printing and packaging, adhesives, automotive and motorcycle industries, cosmetics, metals, electronics, electroplating, pharmaceuticals, etc. Xenon arc lamp aging test chamber can quickly and realistically reproduces the sunlight, rain, dew on the materials of the damage: it takes only a few days or a few weeks Q8 to reproduce outdoor need months or years To produce damage: including fading, discoloration, brightness loss, chalking, cracking, blurring, embrittlement, strength loss and oxidation.
Xenon lamp aging test chamber features
1. the specimen installation thickness can be adjusted, the specimen is fast and easy to press and install.
2. the upward rotating door does not hinder the user to operate the equipment, only occupies a small space.
3. unique condensation system using ordinary tap water can meet the requirements.
4、Water heater is under the container, not immersed in water, long life, easy maintenance.
5、Water level control is placed on the outside of the UV box, easy to monitor.
6. the equipment has casters, easy to move, casters are standard accessories.
8、Computer programming is convenient, misoperation and fault automatic alarm. Light intensity programmable
9. there amplitude illumination calibrator calibration can extend the lamp life (longer than 1600 hours).
9. there are Chinese and English manual, easy to access.
10. divided into ordinary, light amplitude illumination control type, spray type.
Xenon lamp aging test chamber technical parameters
1. the condensing device simulates the effect of outdoor humidity, the humidity can be achieved
2. there is an electronic eye irradiance control system
3. through the blackboard temperature sensor to measure the temperature accurately, can be repeated to reproduce the test results
4、Humidity, condensation, water spray can cycle continuous test
5. amplitude illuminance with CR-10 calibrator traceability and automatic calibration procedures
6. the number of test samples: 75mm × 300mm samples 24 75mm × 150mm samples 48 pieces
Xenon lamp aging test chamber control system
1. light and condensation of independent control time and alternate cycle control time can be set arbitrarily within 999h.
2、French “Schneider” components, Philips rectifier and starter (to ensure that each boot can light up the ultraviolet lamp).
3、Using black aluminum plate to connect the temperature sensor, using the blackboard temperature, instrument control heating, temperature is more stable.
4、Radiometer probe adopts fixed type, without loading and unloading every time.
5. radiation using high-precision display and measurement of ultraviolet irradiance meter.
6. light and condensation can be duly controlled can alternate cycle control.
在线联系供应商
Other supplier products
 |
Flooring Materials Abrasion Resistance Tester | Standard ASTM D3884(Abrasion Resistance of Textile Fabrics) ISO 5470-1(Rubber or Plastics-Coated Fabrics - Abrasion Resistance) EN 660-2(Abrasio... |
 |
Ink printing proof press | How it works: Ink printing proof machine is mainly based on the principle of printing reproduction, through the simulation of the press pressure, ... |
 |
Gravel Resistant Impact Tester/Stone chip tester，ISO 20567，automatic gravel impact tester | Application 1. Automotive Industry Vehicle Body Coating Testing: Testing the chip resistance of coatings on car chassis, doors, bumpers, etc., to... |
 |
Wool Shrinkage Tester | YM116 type wool fold shrinkage tester is a precision instrument to determine the length of the towel under the standard tension. The instrument ad... |
 |
Standard light source sample table | Standards ISO 3664:2009: Meets international standards for graphic arts and photography view conditions. DIN 6173-2: European norm for illuminant... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
